About Hancock County Fire and EMS Frequencies
Quick answer: Fire dispatch for Hancock County: Hancock County Fire 154.4450 MHz, FM, no tone. EMS dispatch for Hancock County: Hancock County EMS 155.0400 MHz, FM, no tone. Trunked: Iowa Statewide Interoperable Communications System (ISICS), for example Hancock County Fire talkgroup 31311 (hex 7a4f).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Iowa Statewide Interoperable Communications System (ISICS): 8 talkgroups. A trunking scanner is required, and it must support the system type shown.
Data updated .
Hancock County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hancock County Fire | Hancock County Fire – Dispatch | 154.4450 | FM | WNLX693 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hancock County EMS | County EMS | 155.0400 | FM | KDA710 |
Hancock County trunked talkgroups
Iowa Statewide Interoperable Communications System (ISICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Hancock County Fire | Hancock County Fire – Dispatch | 31311 | 7a4f | T |
| Hancock County Fire | Hancock County Fire – Tactical Channel | 31312 | 7a50 | T |
| Hancock County Fire | Hancock County Fire – Tactical Channel | 31313 | 7a51 | T |
| Hancock County EMS | Hancock County EMS – Dispatch | 31314 | 7a52 | T |
| Hancock County EMS | Hancock County EMS – Tactical Channel | 31315 | 7a53 | T |
| Hancock County EMS | Hancock County EMS – Tactical Channel | 31316 | 7a54 | T |
| Hancock County Hospital | Hancock County Health Systems | 31317 | 7a55 | T |
| Hancock County Hospital | Hancock County Health Systems | 31318 | 7a56 | T |
Radio system sites in Hancock County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Hancock County
Common questions
What frequency does the fire department use in Hancock County?
Fire dispatch channels listed for Hancock County: Hancock County Fire 154.4450 MHz, FM, no tone.
What frequency does EMS or the ambulance service use in Hancock County?
EMS dispatch channels listed for Hancock County: Hancock County EMS 155.0400 MHz, FM, no tone.
Do fire departments and EMS use a trunked radio system in Hancock County?
Yes. Fire and EMS talkgroups are listed for Iowa Statewide Interoperable Communications System (ISICS): 8 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Hancock County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
Are Hancock County fire and EMS frequencies encrypted?
None of the 2 conventional frequencies listed for Hancock County are marked encrypted.
Are Hancock County fire and EMS talkgroups encrypted?
None of the 8 talkgroups listed for Hancock County are marked encrypted.