Skip to content

Garner Fire and EMS Frequencies

Garner in Hancock County, Iowa has 1 conventional frequency and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Garner (Iowa Statewide Interoperable Communications System (ISICS)), about 5 miles away.

About Garner Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Garner: Hancock County Fire 154.4450 MHz, FM, no tone. EMS dispatch for Garner: Garner EMS 151.4500 MHz, FM, no tone. Trunked: Iowa Statewide Interoperable Communications System (ISICS), for example Hancock County Fire talkgroup 31311 (hex 7a4f).

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Iowa Statewide Interoperable Communications System (ISICS): 8 talkgroups. A trunking scanner is required, and it must support the system type shown.

Data updated .

Garner conventional frequencies

EMS Dispatch

EMS Dispatch frequencies for Garner
AgencyDescriptionFrequency (MHz)ToneModeFCC
Garner EMSEMS Tone Out151.4500FM—

Hancock County channels that also cover Garner

Fire Dispatch

Fire Dispatch frequencies for Hancock County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hancock County FireHancock County Fire – Dispatch154.4450FMWNLX693

EMS Dispatch

EMS Dispatch frequencies for Hancock County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hancock County EMSCounty EMS155.0400FMKDA710

Iowa Statewide Interoperable Communications System (ISICS)

Iowa Statewide Interoperable Communications System (ISICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Hancock County FireHancock County Fire – Dispatch313117a4fT
Hancock County FireHancock County Fire – Tactical Channel313127a50T
Hancock County FireHancock County Fire – Tactical Channel313137a51T
Hancock County EMSHancock County EMS – Dispatch313147a52T
Hancock County EMSHancock County EMS – Tactical Channel313157a53T
Hancock County EMSHancock County EMS – Tactical Channel313167a54T
Hancock County HospitalHancock County Health Systems313177a55T
Hancock County HospitalHancock County Health Systems313187a56T

Nearest trunked radio sites

Distances are measured from the center of Garner.

Garner · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 2 · Site 41 (hex 29) · about 5 mi away
Voice 772.06875, 772.38125, 772.70625, 774.69375
Leland · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 92 (hex 5C) · NAC 4C2 · about 19 mi away
Control 773.78125, 774.03125, 774.28125
Voice 773.03125, 773.53125
Mason City · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 65 (hex 41) · NAC 4C4 · about 20 mi away
Control 769.90625, 770.15625, 770.40625
Voice 769.65625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Garner?

We do not have a fire dispatch channel listed specifically for Garner. The county-level fire dispatch channels in the same county: Hancock County Fire 154.4450 MHz, FM, no tone.

What frequency does EMS or the ambulance service use in Garner?

EMS dispatch channels listed for Garner: Garner EMS 151.4500 MHz, FM, no tone.

Do fire departments and EMS use a trunked radio system in Garner?

Yes. The county-level systems that cover Garner are Fire and EMS talkgroups are listed for Iowa Statewide Interoperable Communications System (ISICS): 8 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Garner?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Garner?

For Garner, start with the Leland site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 773.78125, 774.03125, 774.28125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Garner fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Garner are marked encrypted.