Skip to content

Corwith Fire and EMS Frequencies

We do not have frequencies listed specifically for Corwith in Hancock County, Iowa yet. Countywide channels for Hancock County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Garner (Iowa Statewide Interoperable Communications System (ISICS)), about 16 miles away.

About Corwith Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Corwith: Hancock County Fire 154.4450 MHz, FM, no tone. County-level ems dispatch that covers Corwith: Hancock County EMS 155.0400 MHz, FM, no tone. Trunked: Iowa Statewide Interoperable Communications System (ISICS), for example Hancock County Fire talkgroup 31311 (hex 7a4f).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Iowa Statewide Interoperable Communications System (ISICS): 8 talkgroups. A trunking scanner is required, and it must support the system type shown.

Data updated .

Hancock County channels that also cover Corwith

Fire Dispatch

Fire Dispatch frequencies for Hancock County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hancock County FireHancock County Fire – Dispatch154.4450FMWNLX693

EMS Dispatch

EMS Dispatch frequencies for Hancock County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hancock County EMSCounty EMS155.0400FMKDA710

Iowa Statewide Interoperable Communications System (ISICS)

Iowa Statewide Interoperable Communications System (ISICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Hancock County FireHancock County Fire – Dispatch313117a4fT
Hancock County FireHancock County Fire – Tactical Channel313127a50T
Hancock County FireHancock County Fire – Tactical Channel313137a51T
Hancock County EMSHancock County EMS – Dispatch313147a52T
Hancock County EMSHancock County EMS – Tactical Channel313157a53T
Hancock County EMSHancock County EMS – Tactical Channel313167a54T
Hancock County HospitalHancock County Health Systems313177a55T
Hancock County HospitalHancock County Health Systems313187a56T

Nearest trunked radio sites

Distances are measured from the center of Corwith.

Garner · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 2 · Site 41 (hex 29) · about 16 mi away
Voice 772.06875, 772.38125, 772.70625, 774.69375
Burt · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 55 (hex 37) · NAC 4C5 · about 20 mi away
Control 769.91875, 770.16875, 770.41875
Voice 769.16875, 769.41875, 769.66875
Eagle Grove · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 2 · Site 99 (hex 63) · NAC 4C9 · about 21 mi away
Control 770.95625, 774.58125, 774.83125
Voice 770.70625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Corwith?

We do not have a fire dispatch channel listed specifically for Corwith. The county-level fire dispatch channels in the same county: Hancock County Fire 154.4450 MHz, FM, no tone.

What frequency does EMS or the ambulance service use in Corwith?

We do not have a EMS dispatch channel listed specifically for Corwith. The county-level EMS dispatch channels in the same county: Hancock County EMS 155.0400 MHz, FM, no tone.

Do fire departments and EMS use a trunked radio system in Corwith?

Yes. The county-level systems that cover Corwith are Fire and EMS talkgroups are listed for Iowa Statewide Interoperable Communications System (ISICS): 8 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Corwith?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Corwith?

For Corwith, start with the Burt site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 769.91875, 770.16875, 770.41875 MHz. Program a control channel first; the scanner finds the voice channels from it.