Skip to content

Davis County Fire and EMS Frequencies

Davis County in Iowa has 6 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 4 cities and communities below for local fire departments and EMS agencies.

About Davis County Fire and EMS Frequencies

Quick answer: Fire dispatch for Davis County: Davis County Fire 154.3850 MHz, narrow FM, 123.0 PL. EMS dispatch for Davis County: Davis County EMS 159.0900 MHz, narrow FM, 146.2 PL.

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 2 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.

Data updated .

Davis County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Davis County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Davis County FireDavis County Fire – Dispatch154.3850123.0 PLFMNWSL596
Davis County FireP25 Fire Dispatch154.3850NAC 26FP25WSL596
Davis County FireFire / EMS Paging155.5350CSQFMNKAD447

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Davis County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Davis County FireDavis County Fire – Fire Ground158.8650123.0 PLFMNWSL596

EMS Dispatch

EMS Dispatch frequencies for Davis County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Davis County EMSDispatch and Response159.0900
In 153.9800
146.2 PLFMNKAD447
Davis County EMSP25 EMS Dispatch and Response159.0900
In 153.9800
NAC 26AP25KAD447

Radio system sites in Davis County

Program the control channel first; your scanner finds the voice channels from it.

Bloomfield · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 27 (hex 1B) · NAC 4C3
Control 769.96875, 770.21875, 770.46875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Davis County

Common questions

What frequency does the fire department use in Davis County?

Fire dispatch channels listed for Davis County: Davis County Fire 154.3850 MHz, narrow FM, 123.0 PL.

What frequency does EMS or the ambulance service use in Davis County?

EMS dispatch channels listed for Davis County: Davis County EMS 159.0900 MHz, narrow FM, 146.2 PL.

What scanner do I need to listen to fire and EMS in Davis County?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Davis County?

For Davis County, start with the Bloomfield site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 769.96875, 770.21875, 770.46875 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Davis County fire and EMS frequencies encrypted?

None of the 6 conventional frequencies listed for Davis County are marked encrypted.