Skip to content

Clinton County Fire and EMS Frequencies

Clinton County in Iowa has 2 countywide conventional frequencies and 7 countywide talkgroups in our database. Use the list of 14 cities and communities below for local fire departments and EMS agencies.

About Clinton County Fire and EMS Frequencies

Quick answer: Fire dispatch for Clinton County: Clinton County Fire 154.2350 MHz, narrow FM, CSQ. Trunked: Iowa Statewide Interoperable Communications System (ISICS), for example Clinton County Fire talkgroup 23530 (hex 5bea).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Iowa Statewide Interoperable Communications System (ISICS): 7 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Clinton County, start with the Clinton site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels: 854.3875, 856.0375, 858.0375 MHz.

Data updated .

Clinton County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Clinton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Clinton County FireClinton County Fire – Dispatch (146.2PL for Voice Operations)154.2350
In 150.8050
CSQFMNWPTP864

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Clinton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Clinton County FireFire Extenders159.3150FMNWPTP864

Clinton County trunked talkgroups

Iowa Statewide Interoperable Communications System (ISICS)

Iowa Statewide Interoperable Communications System (ISICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Clinton County FireClinton County Fire – Dispatch235305beaT
Clinton County FireClinton County Fire – Fire Ground235315bebT
Clinton County FireClinton County Fire – Fire Ground235325becT
Clinton County FireClinton County Fire – Fire Ground235335bedT
Clinton County FireClinton County Fire – Fire Ground235345beeT
Clinton County FireClinton County Fire – Fire Ground235355befT
Clinton County EMSGenesis DeWitt Amblance Page4140102cT

Radio system sites in Clinton County

Program the control channel first; your scanner finds the voice channels from it.

Clinton · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 2 · Site 23 (hex 17) · NAC 4CC
Control 854.3875, 856.0375, 858.0375
Voice 857.0375
Dewitt · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 54 (hex 36) · NAC 4C5
Control 769.45625, 769.95625, 770.45625
Voice 769.20625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Clinton County

Common questions

What frequency does the fire department use in Clinton County?

Fire dispatch channels listed for Clinton County: Clinton County Fire 154.2350 MHz, narrow FM, CSQ.

Do fire departments and EMS use a trunked radio system in Clinton County?

Yes. Fire and EMS talkgroups are listed for Iowa Statewide Interoperable Communications System (ISICS): 7 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Clinton County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Clinton County?

For Clinton County, start with the Clinton site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 854.3875, 856.0375, 858.0375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Clinton County fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Clinton County are marked encrypted.

Are Clinton County fire and EMS talkgroups encrypted?

None of the 7 talkgroups listed for Clinton County are marked encrypted.