About Delmar Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Delmar: Clinton County Fire 154.2350 MHz, narrow FM, CSQ. Trunked: Iowa Statewide Interoperable Communications System (ISICS), for example Clinton County Fire talkgroup 23530 (hex 5bea).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Iowa Statewide Interoperable Communications System (ISICS): 7 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Delmar, start with the Maquoketa site of Iowa Statewide Interoperable Communications System (ISICS), about 9 miles away. Its control channels: 769.40625, 770.15625, 770.40625 MHz.
Data updated .
Clinton County channels that also cover Delmar
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Clinton County Fire | Clinton County Fire – Dispatch (146.2PL for Voice Operations) | 154.2350 In 150.8050 | CSQ | FMN | WPTP864 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Clinton County Fire | Fire Extenders | 159.3150 | FMN | WPTP864 |
Iowa Statewide Interoperable Communications System (ISICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Clinton County Fire | Clinton County Fire – Dispatch | 23530 | 5bea | T |
| Clinton County Fire | Clinton County Fire – Fire Ground | 23531 | 5beb | T |
| Clinton County Fire | Clinton County Fire – Fire Ground | 23532 | 5bec | T |
| Clinton County Fire | Clinton County Fire – Fire Ground | 23533 | 5bed | T |
| Clinton County Fire | Clinton County Fire – Fire Ground | 23534 | 5bee | T |
| Clinton County Fire | Clinton County Fire – Fire Ground | 23535 | 5bef | T |
| Clinton County EMS | Genesis DeWitt Amblance Page | 4140 | 102c | T |
Nearest trunked radio sites
Distances are measured from the center of Delmar.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Delmar?
We do not have a fire dispatch channel listed specifically for Delmar. The county-level fire dispatch channels in the same county: Clinton County Fire 154.2350 MHz, narrow FM, CSQ.
Do fire departments and EMS use a trunked radio system in Delmar?
Yes. The county-level systems that cover Delmar are Fire and EMS talkgroups are listed for Iowa Statewide Interoperable Communications System (ISICS): 7 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Delmar?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Delmar?
For Delmar, start with the Maquoketa site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 769.40625, 770.15625, 770.40625 MHz. Program a control channel first; the scanner finds the voice channels from it.