Skip to content

Charlotte Fire and EMS Frequencies

We do not have frequencies listed specifically for Charlotte in Clinton County, Iowa yet. Countywide channels for Clinton County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Dewitt (Iowa Statewide Interoperable Communications System (ISICS)), about 11 miles away.

About Charlotte Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Charlotte: Clinton County Fire 154.2350 MHz, narrow FM, CSQ. Trunked: Iowa Statewide Interoperable Communications System (ISICS), for example Clinton County Fire talkgroup 23530 (hex 5bea).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Iowa Statewide Interoperable Communications System (ISICS): 7 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Charlotte, start with the Dewitt site of Iowa Statewide Interoperable Communications System (ISICS), about 11 miles away. Its control channels: 769.45625, 769.95625, 770.45625 MHz.

Data updated .

Clinton County channels that also cover Charlotte

Fire Dispatch

Fire Dispatch frequencies for Clinton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Clinton County FireClinton County Fire – Dispatch (146.2PL for Voice Operations)154.2350
In 150.8050
CSQFMNWPTP864

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Clinton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Clinton County FireFire Extenders159.3150FMNWPTP864

Iowa Statewide Interoperable Communications System (ISICS)

Iowa Statewide Interoperable Communications System (ISICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Clinton County FireClinton County Fire – Dispatch235305beaT
Clinton County FireClinton County Fire – Fire Ground235315bebT
Clinton County FireClinton County Fire – Fire Ground235325becT
Clinton County FireClinton County Fire – Fire Ground235335bedT
Clinton County FireClinton County Fire – Fire Ground235345beeT
Clinton County FireClinton County Fire – Fire Ground235355befT
Clinton County EMSGenesis DeWitt Amblance Page4140102cT

Nearest trunked radio sites

Distances are measured from the center of Charlotte.

Dewitt · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 54 (hex 36) · NAC 4C5 · about 11 mi away
Control 769.45625, 769.95625, 770.45625
Voice 769.20625
Sabula · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 46 (hex 2E) · NAC 4C6 · about 13 mi away
Control 773.53125, 773.78125, 774.28125
Voice 773.03125
Clinton · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 2 · Site 23 (hex 17) · NAC 4CC · about 14 mi away
Control 854.3875, 856.0375, 858.0375
Voice 857.0375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Charlotte?

We do not have a fire dispatch channel listed specifically for Charlotte. The county-level fire dispatch channels in the same county: Clinton County Fire 154.2350 MHz, narrow FM, CSQ.

Do fire departments and EMS use a trunked radio system in Charlotte?

Yes. The county-level systems that cover Charlotte are Fire and EMS talkgroups are listed for Iowa Statewide Interoperable Communications System (ISICS): 7 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Charlotte?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Charlotte?

For Charlotte, start with the Dewitt site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 769.45625, 769.95625, 770.45625 MHz. Program a control channel first; the scanner finds the voice channels from it.