Skip to content

Corning Fire and EMS Frequencies

Corning in Adams County, Iowa has 1 conventional frequency and 1 trunked talkgroup listed for local fire and EMS agencies. The closest trunked radio site we have is Corning (Iowa Statewide Interoperable Communications System (ISICS)), about 2 miles away.

About Corning Fire and EMS Frequencies

Quick answer: Fire dispatch for Corning: Corning Fire 154.1750 MHz, FM, no tone. Trunked: Iowa Statewide Interoperable Communications System (ISICS), for example Corning Fire talkgroup 15217 (hex 3b71).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Iowa Statewide Interoperable Communications System (ISICS): 1 talkgroup; Iowa Statewide Interoperable Communications System (ISICS): 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Corning, start with the Corning site of Iowa Statewide Interoperable Communications System (ISICS), about 2 miles away. Its control channels: 773.80625, 774.05625, 774.30625 MHz.

Data updated .

Corning conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Corning
AgencyDescriptionFrequency (MHz)ToneModeFCC
Corning FireCorning Fire – Dispatch154.1750FMKNDD764

Corning trunked talkgroups

Iowa Statewide Interoperable Communications System (ISICS)

Iowa Statewide Interoperable Communications System (ISICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Corning FireCorning Fire Page152173b71T

Adams County channels that also cover Corning

Fire Dispatch

Fire Dispatch frequencies for Adams County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Adams County FireAdams County Fire – Dispatch155.8650FMKKD523

Iowa Statewide Interoperable Communications System (ISICS)

Iowa Statewide Interoperable Communications System (ISICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Adams County FireFire Operations152033b63T
Adams County FireAdams County Fire – Dispatch152043b64T
Adams County FireAdams County Fire – Tactical Channel152053b65T

Nearest trunked radio sites

Distances are measured from the center of Corning.

Corning · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 3 (hex 3) · NAC 4C3 · about 2 mi away
Control 773.80625, 774.05625, 774.30625
Voice 773.55625
Montgomery Co Simulcast · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 2 · Site 48 (hex 30) · about 23 mi away
Control 770.93125, 774.55625, 774.80625
Voice 770.68125
Union Co Simulcast · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 2 · Site 64 (hex 40) · NAC 4C2 · about 26 mi away
Control 770.90625, 774.53125, 774.78125
Voice 770.65625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Corning?

Fire dispatch channels listed for Corning: Corning Fire 154.1750 MHz, FM, no tone.

Do fire departments and EMS use a trunked radio system in Corning?

Yes. Fire and EMS talkgroups are listed for Iowa Statewide Interoperable Communications System (ISICS): 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Corning?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Corning?

For Corning, start with the Corning site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 773.80625, 774.05625, 774.30625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Corning fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Corning are marked encrypted.

Are Corning fire and EMS talkgroups encrypted?

None of the 1 talkgroups listed for Corning are marked encrypted.