About Wabash County Fire and EMS Frequencies
Quick answer: Fire dispatch for Wabash County: Wabash County Fire 154.4300 MHz, narrow FM, 203.5 PL. EMS dispatch for Wabash County: Wabash County EMS 155.9625 MHz, narrow FM, 77.0 PL; Wabash General Hospital - Mt. Carmel 155.2200 MHz, narrow FM, 77.0 PL.
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Wabash County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Wabash County Fire | Wabash County Fire – Countywide Dispatch | 154.4300 | 203.5 PL | FMN | WPZI639 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Wabash County EMS | Wabash County EMS – Dispatch | 155.9625 In 154.0775 | 77.0 PL | FMN | WNUB390 |
| Wabash General Hospital - Mt. Carmel | Wabash General Hospital – Mt. Carmel – Dispatch (Medics) | 155.2200 | 77.0 PL | FMN | WSMJ216 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Wabash General Hospital - Mt. Carmel | Patient Reports | 155.3400 | FMN | KAQ347 |
Radio system sites in Wabash County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Wabash County
Common questions
What frequency does the fire department use in Wabash County?
Fire dispatch channels listed for Wabash County: Wabash County Fire 154.4300 MHz, narrow FM, 203.5 PL.
What frequency does EMS or the ambulance service use in Wabash County?
EMS dispatch channels listed for Wabash County: Wabash County EMS 155.9625 MHz, narrow FM, 77.0 PL; Wabash General Hospital - Mt. Carmel 155.2200 MHz, narrow FM, 77.0 PL.
What scanner do I need to listen to fire and EMS in Wabash County?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Wabash County?
For Wabash County, start with the Mt. Carmel site of STARCOM21 Statewide Illinois. Its control channels are 852.375, 852.9 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Wabash County fire and EMS frequencies encrypted?
None of the 4 conventional frequencies listed for Wabash County are marked encrypted.