Skip to content

Wabash County Police Frequencies

Wabash County in Illinois has 2 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 4 cities and communities below for local police departments.

About Wabash County Police Frequencies

Quick answer: Dispatch for Wabash County: Wabash County Sheriff 151.1000 MHz, narrow FM, 77.0 PL.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.

Data updated .

Wabash County conventional frequencies

Dispatch

Dispatch frequencies for Wabash County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Wabash County SheriffBack-Up151.1000
In 155.9850
77.0 PLFMNWPNX612
Wabash County SheriffWabash County Sheriff – Dispatch / Mt Carmel Police (911)151.1000
In 155.9850
NAC 168P25WPNX612

Radio system sites in Wabash County

Program the control channel first; your scanner finds the voice channels from it.

Mt. Carmel · STARCOM21 Statewide Illinois
RFSS 3 · Site 3 (hex 3) · NAC 14B
Control 852.375, 852.9
Voice 851.85, 857.8875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Wabash County

Common questions

What frequency do the police use in Wabash County?

Dispatch channels listed for Wabash County: Wabash County Sheriff 151.1000 MHz, narrow FM, 77.0 PL.

What is the sheriff's dispatch frequency in Wabash County?

Wabash County Sheriff 151.1000 MHz, narrow FM, 77.0 PL.

What scanner do I need to listen to police in Wabash County?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Wabash County?

For Wabash County, start with the Mt. Carmel site of STARCOM21 Statewide Illinois. Its control channels are 852.375, 852.9 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Wabash County police frequencies encrypted?

None of the 2 conventional frequencies listed for Wabash County are marked encrypted.