Skip to content

Allendale Fire and EMS Frequencies

We do not have frequencies listed specifically for Allendale in Wabash County, Illinois yet. Countywide channels for Wabash County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Mt. Carmel (STARCOM21 Statewide Illinois), about 9 miles away.

About Allendale Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Allendale: Wabash County Fire 154.4300 MHz, narrow FM, 203.5 PL. County-level ems dispatch that covers Allendale: Wabash County EMS 155.9625 MHz, narrow FM, 77.0 PL; Wabash General Hospital - Mt. Carmel 155.2200 MHz, narrow FM, 77.0 PL.

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Wabash County channels that also cover Allendale

Fire Dispatch

Fire Dispatch frequencies for Wabash County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Wabash County FireWabash County Fire – Countywide Dispatch154.4300203.5 PLFMNWPZI639

EMS Dispatch

EMS Dispatch frequencies for Wabash County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Wabash County EMSWabash County EMS – Dispatch155.9625
In 154.0775
77.0 PLFMNWNUB390
Wabash General Hospital - Mt. CarmelWabash General Hospital – Mt. Carmel – Dispatch (Medics)155.220077.0 PLFMNWSMJ216

Hospitals & Medical

Hospitals & Medical frequencies for Wabash County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Wabash General Hospital - Mt. CarmelPatient Reports155.3400FMNKAQ347

Nearest trunked radio sites

Distances are measured from the center of Allendale.

Mt. Carmel · STARCOM21 Statewide Illinois
RFSS 3 · Site 3 (hex 3) · NAC 14B · about 9 mi away
Control 852.375, 852.9
Voice 851.85, 857.8875
Lawrenceville · STARCOM21 Statewide Illinois
RFSS 3 · Site 11 (hex B) · NAC 146 · about 11 mi away
Control 853.4, 853.975, 858.2125
Voice 852.875
Sumner · STARCOM21 Statewide Illinois
RFSS 3 · Site 2 (hex 2) · NAC 148 · about 12 mi away
Control 851.9125, 853.4875
Voice 851.3875, 855.2125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Allendale?

We do not have a fire dispatch channel listed specifically for Allendale. The county-level fire dispatch channels in the same county: Wabash County Fire 154.4300 MHz, narrow FM, 203.5 PL.

What frequency does EMS or the ambulance service use in Allendale?

We do not have a EMS dispatch channel listed specifically for Allendale. The county-level EMS dispatch channels in the same county: Wabash County EMS 155.9625 MHz, narrow FM, 77.0 PL; Wabash General Hospital - Mt. Carmel 155.2200 MHz, narrow FM, 77.0 PL.

What scanner do I need to listen to fire and EMS in Allendale?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Allendale?

For Allendale, start with the Mt. Carmel site of STARCOM21 Statewide Illinois. Its control channels are 852.375, 852.9 MHz. Program a control channel first; the scanner finds the voice channels from it.