Skip to content

Ullin Fire and EMS Frequencies

We do not have frequencies listed specifically for Ullin in Pulaski County, Illinois yet. Countywide channels for Pulaski County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Elco (STARCOM21 Statewide Illinois), about 8 miles away.

About Ullin Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Ullin: Pulaski County Sheriff / 911 - ETSB 151.4225 MHz, narrow FM, 265 DPL; Tri-County Fire and Rescue 153.7550 MHz, narrow FM, no tone. County-level ems dispatch that covers Ullin: Pulaski County Sheriff / 911 - ETSB 155.2200 MHz, narrow FM, no tone.

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Pulaski County channels that also cover Ullin

Fire Dispatch

Fire Dispatch frequencies for Pulaski County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Pulaski County Sheriff / 911 - ETSBFire/EMS Dispatch151.4225
In 159.2550
265 DPLFMNWPNR373
Pulaski County Sheriff / 911 - ETSBPulaski County Sheriff / 911 – ETSB – Rural Dispatch (Mound City)159.1050
In 153.9500
FMNWPKP985
Tri-County Fire and RescueTri-County Fire and Rescue – Dispatch (Richland)153.7550
In 159.1500
FMNWPLZ698

EMS Dispatch

EMS Dispatch frequencies for Pulaski County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Pulaski County Sheriff / 911 - ETSBPulaski County Sheriff / 911 – ETSB – Dispatch155.2200FMNKNJK591

Nearest trunked radio sites

Distances are measured from the center of Ullin.

Elco · STARCOM21 Statewide Illinois
RFSS 3 · Site 41 (hex 29) · NAC 148 · about 8 mi away
Control 851.925, 852.45
Voice 851.4
Villa Ridge · STARCOM21 Statewide Illinois
RFSS 3 · Site 51 (hex 33) · NAC 14A · about 9 mi away
Control 851.8875, 852.475
Voice 851.425, 851.95
Cypress · STARCOM21 Statewide Illinois
RFSS 3 · Site 17 (hex 11) · NAC 147 · about 11 mi away
Control 851.9875, 852.825, 853.925
Voice 851.4625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Ullin?

We do not have a fire dispatch channel listed specifically for Ullin. The county-level fire dispatch channels in the same county: Pulaski County Sheriff / 911 - ETSB 151.4225 MHz, narrow FM, 265 DPL; Tri-County Fire and Rescue 153.7550 MHz, narrow FM, no tone.

What frequency does EMS or the ambulance service use in Ullin?

We do not have a EMS dispatch channel listed specifically for Ullin. The county-level EMS dispatch channels in the same county: Pulaski County Sheriff / 911 - ETSB 155.2200 MHz, narrow FM, no tone.

What scanner do I need to listen to fire and EMS in Ullin?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Ullin?

For Ullin, start with the Elco site of STARCOM21 Statewide Illinois. Its control channels are 851.925, 852.45 MHz. Program a control channel first; the scanner finds the voice channels from it.