Skip to content

Mounds Fire and EMS Frequencies

Mounds in Pulaski County, Illinois has 1 conventional frequency and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Villa Ridge (STARCOM21 Statewide Illinois), about 3 miles away.

About Mounds Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Mounds: Pulaski County Sheriff / 911 - ETSB 151.4225 MHz, narrow FM, 265 DPL; Tri-County Fire and Rescue 153.7550 MHz, narrow FM, no tone. County-level ems dispatch that covers Mounds: Pulaski County Sheriff / 911 - ETSB 155.2200 MHz, narrow FM, no tone.

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Mounds conventional frequencies

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Mounds
AgencyDescriptionFrequency (MHz)ToneModeFCC
Mounds FireMounds Fire – Fire Ground154.2350FMNWNSB368

Pulaski County channels that also cover Mounds

Fire Dispatch

Fire Dispatch frequencies for Pulaski County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Pulaski County Sheriff / 911 - ETSBFire/EMS Dispatch151.4225
In 159.2550
265 DPLFMNWPNR373
Pulaski County Sheriff / 911 - ETSBPulaski County Sheriff / 911 – ETSB – Rural Dispatch (Mound City)159.1050
In 153.9500
FMNWPKP985
Tri-County Fire and RescueTri-County Fire and Rescue – Dispatch (Richland)153.7550
In 159.1500
FMNWPLZ698

EMS Dispatch

EMS Dispatch frequencies for Pulaski County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Pulaski County Sheriff / 911 - ETSBPulaski County Sheriff / 911 – ETSB – Dispatch155.2200FMNKNJK591

Nearest trunked radio sites

Distances are measured from the center of Mounds.

Villa Ridge · STARCOM21 Statewide Illinois
RFSS 3 · Site 51 (hex 33) · NAC 14A · about 3 mi away
Control 851.8875, 852.475
Voice 851.425, 851.95
Elco · STARCOM21 Statewide Illinois
RFSS 3 · Site 41 (hex 29) · NAC 148 · about 15 mi away
Control 851.925, 852.45
Voice 851.4
McClure · STARCOM21 Statewide Illinois
RFSS 3 · Site 42 (hex 2A) · NAC 149 · about 19 mi away
Control 852.95, 853.475
Voice 852.425
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Mounds?

We do not have a fire dispatch channel listed specifically for Mounds. The county-level fire dispatch channels in the same county: Pulaski County Sheriff / 911 - ETSB 151.4225 MHz, narrow FM, 265 DPL; Tri-County Fire and Rescue 153.7550 MHz, narrow FM, no tone.

What frequency does EMS or the ambulance service use in Mounds?

We do not have a EMS dispatch channel listed specifically for Mounds. The county-level EMS dispatch channels in the same county: Pulaski County Sheriff / 911 - ETSB 155.2200 MHz, narrow FM, no tone.

What scanner do I need to listen to fire and EMS in Mounds?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Mounds?

For Mounds, start with the Villa Ridge site of STARCOM21 Statewide Illinois. Its control channels are 851.8875, 852.475 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Mounds fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Mounds are marked encrypted.