Skip to content

Mill Creek Fire and EMS Frequencies

We do not have frequencies listed specifically for Mill Creek in Union County, Illinois yet. Countywide channels for Union County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Elco (STARCOM21 Statewide Illinois), about 4 miles away.

About Mill Creek Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Mill Creek: Union County Fire 154.4000 MHz, narrow FM, no tone. County-level ems dispatch that covers Mill Creek: Union County EMS 155.2200 MHz, narrow FM, no tone.

  • 10 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Union County channels that also cover Mill Creek

Fire Dispatch

Fire Dispatch frequencies for Union County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Union County Fire911 – Fire (Multiple Towers)154.4000FMNWPKH623
Union County FireUnion County Fire – Dispatch159.1500
In 153.8600
411 DPLFMNKNNJ353
Union County FireRemote Link to 159.15R – Dongola453.2500FMNWPPZ707
Union County FireRemote Link to 159.15R – Dongola453.4250FMNKNNJ353
Union County FireRemote Link to 159.15R – Wolf Lake453.9750FMNKNNJ353
Union County FireRemote Link to 159.15R – Jonesboro458.2500FMNWPPZ707
Union County FireRemote Link to 159.15R – Jonesboro458.4250FMNKNNJ353
Union County FireRemote Link to 159.15R – Jonesboro458.9750FMNKNNJ353

EMS Dispatch

EMS Dispatch frequencies for Union County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Union County EMSUnion County EMS – Dispatch155.2200FMNWRYB804

Hospitals & Medical

Hospitals & Medical frequencies for Union County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Anna HospitalPatient Reports155.3400FMNKZB401

Nearest trunked radio sites

Distances are measured from the center of Mill Creek.

Elco · STARCOM21 Statewide Illinois
RFSS 3 · Site 41 (hex 29) · NAC 148 · about 4 mi away
Control 851.925, 852.45
Voice 851.4
McClure · STARCOM21 Statewide Illinois
RFSS 3 · Site 42 (hex 2A) · NAC 149 · about 11 mi away
Control 852.95, 853.475
Voice 852.425
Villa Ridge · STARCOM21 Statewide Illinois
RFSS 3 · Site 51 (hex 33) · NAC 14A · about 14 mi away
Control 851.8875, 852.475
Voice 851.425, 851.95
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Mill Creek?

We do not have a fire dispatch channel listed specifically for Mill Creek. The county-level fire dispatch channels in the same county: Union County Fire 154.4000 MHz, narrow FM, no tone.

What frequency does EMS or the ambulance service use in Mill Creek?

We do not have a EMS dispatch channel listed specifically for Mill Creek. The county-level EMS dispatch channels in the same county: Union County EMS 155.2200 MHz, narrow FM, no tone.

What scanner do I need to listen to fire and EMS in Mill Creek?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Mill Creek?

For Mill Creek, start with the Elco site of STARCOM21 Statewide Illinois. Its control channels are 851.925, 852.45 MHz. Program a control channel first; the scanner finds the voice channels from it.