Skip to content

Pulaski County Fire and EMS Frequencies

Pulaski County in Illinois has 4 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 7 cities and communities below for local fire departments and EMS agencies.

About Pulaski County Fire and EMS Frequencies

Quick answer: Fire dispatch for Pulaski County: Pulaski County Sheriff / 911 - ETSB 151.4225 MHz, narrow FM, 265 DPL; Tri-County Fire and Rescue 153.7550 MHz, narrow FM, no tone. EMS dispatch for Pulaski County: Pulaski County Sheriff / 911 - ETSB 155.2200 MHz, narrow FM, no tone.

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Pulaski County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Pulaski County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Pulaski County Sheriff / 911 - ETSBFire/EMS Dispatch151.4225
In 159.2550
265 DPLFMNWPNR373
Pulaski County Sheriff / 911 - ETSBPulaski County Sheriff / 911 – ETSB – Rural Dispatch (Mound City)159.1050
In 153.9500
FMNWPKP985
Tri-County Fire and RescueTri-County Fire and Rescue – Dispatch (Richland)153.7550
In 159.1500
FMNWPLZ698

EMS Dispatch

EMS Dispatch frequencies for Pulaski County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Pulaski County Sheriff / 911 - ETSBPulaski County Sheriff / 911 – ETSB – Dispatch155.2200FMNKNJK591

Radio system sites in Pulaski County

Program the control channel first; your scanner finds the voice channels from it.

Villa Ridge · STARCOM21 Statewide Illinois
RFSS 3 · Site 51 (hex 33) · NAC 14A
Control 851.8875, 852.475
Voice 851.425, 851.95
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Pulaski County

Common questions

What frequency does the fire department use in Pulaski County?

Fire dispatch channels listed for Pulaski County: Pulaski County Sheriff / 911 - ETSB 151.4225 MHz, narrow FM, 265 DPL; Tri-County Fire and Rescue 153.7550 MHz, narrow FM, no tone.

What frequency does EMS or the ambulance service use in Pulaski County?

EMS dispatch channels listed for Pulaski County: Pulaski County Sheriff / 911 - ETSB 155.2200 MHz, narrow FM, no tone.

What scanner do I need to listen to fire and EMS in Pulaski County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Pulaski County?

For Pulaski County, start with the Villa Ridge site of STARCOM21 Statewide Illinois. Its control channels are 851.8875, 852.475 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Pulaski County fire and EMS frequencies encrypted?

None of the 4 conventional frequencies listed for Pulaski County are marked encrypted.