About Dawson Fire and EMS Frequencies
Quick answer: Fire dispatch for Dawson: Dawson Fire 154.4150 MHz, narrow FM, no tone (expired). County-level ems dispatch that covers Dawson: Terrell County EMS 151.0475 MHz, DMR, CC 1 · TG 2000 · SL 1.
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (DMR), which needs a scanner that decodes that mode.
- 1 entry is marked expired, so it may no longer be in use.
Data updated .
Dawson conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Dawson Fire Expired: Expired 11/12 | Dawson Fire – Dispatch | 154.4150 | FMN | KOM243 |
Terrell County channels that also cover Dawson
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Terrell County EMS | Terrell County EMS – Dispatch | 151.0475 In 156.0525 | CC 1 · TG 2000 · SL 1 | DMR | WQBY621 |
Nearest trunked radio sites
Distances are measured from the center of Dawson.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Dawson?
Fire dispatch channels listed for Dawson: Dawson Fire 154.4150 MHz, narrow FM, no tone (expired).
What frequency does EMS or the ambulance service use in Dawson?
We do not have a EMS dispatch channel listed specifically for Dawson. The county-level EMS dispatch channels in the same county: Terrell County EMS 151.0475 MHz, DMR, CC 1 · TG 2000 · SL 1.
What scanner do I need to listen to fire and EMS in Dawson?
The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.
What are the control channels for trunked radio in Dawson?
For Dawson, start with the Plains site of Sumter County Public Safety. Its control channels are 151.25 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Dawson fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Dawson are marked encrypted.