About Albany Fire and EMS Frequencies
Quick answer: Fire dispatch for Albany: Albany Fire 154.4300 MHz, narrow FM, 146.2 PL. Trunked: Southwest Georgia Regional Radio System, for example Albany Fire talkgroup 21 (hex 15).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (DMR), which needs a scanner that decodes that mode.
- Trunked radio systems that carry fire and EMS traffic here: Southwest Georgia Regional Radio System: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Albany, start with the Albany/Dougherty Co. Simulcast site of Southwest Georgia Regional Radio System, about 2 miles away. Its control channels: 856.4125, 856.7625, 857.2625 MHz.
Data updated .
Albany conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Albany Fire | Albany Fire – Dispatch | 154.4300 In 154.0700 | 146.2 PL | FMN | WQCB522 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Albany Fire | Albany Fire – Alternate | 154.3550 In 153.8900 | DMR | WQCB522 |
Albany trunked talkgroups
Southwest Georgia Regional Radio System
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Albany Fire | Albany Fire – Dispatch | 21 | 15 | D |
| Albany Fire | Albany Fireground | 20 | 14 | D |
Dougherty County channels that also cover Albany
EMS Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Emergency Medical Services | Emergency Medical Services | 159.7650 In 155.6100 | FMN | WPHU417 |
Nearest trunked radio sites
Distances are measured from the center of Albany.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Albany?
Fire dispatch channels listed for Albany: Albany Fire 154.4300 MHz, narrow FM, 146.2 PL.
Do fire departments and EMS use a trunked radio system in Albany?
Yes. Fire and EMS talkgroups are listed for Southwest Georgia Regional Radio System: 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Albany?
The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Albany?
For Albany, start with the Albany/Dougherty Co. Simulcast site of Southwest Georgia Regional Radio System. Its control channels are 856.4125, 856.7625, 857.2625 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Albany fire and EMS frequencies encrypted?
None of the 2 conventional frequencies listed for Albany are marked encrypted.
Are Albany fire and EMS talkgroups encrypted?
None of the 2 talkgroups listed for Albany are marked encrypted.