Skip to content

Plains Fire and EMS Frequencies

We do not have frequencies listed specifically for Plains in Sumter County, Georgia yet. Countywide channels for Sumter County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Plains (Sumter County Public Safety), about 1 miles away.

About Plains Fire and EMS Frequencies

Quick answer: County-level ems dispatch that covers Plains: EMS/Medical Helicopters 152.4125 MHz, narrow FM, 051 DPL. Trunked: Sumter County Public Safety, for example Sumter County Fire talkgroup 201 (hex c9).

  • 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (NXDN48), which needs a scanner that decodes that mode.
  • Trunked radio systems that carry fire and EMS traffic here: Sumter County Public Safety: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Plains, start with the Plains site of Sumter County Public Safety, about 1 miles away. Its control channels: 151.25 MHz.
  • 1 listed entry is marked encrypted. No scanner can decode encrypted audio.
  • 3 entries are marked expired, so they may no longer be in use.

Data updated .

Sumter County channels that also cover Plains

Fire Dispatch

Fire Dispatch frequencies for Sumter County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Sumter County FireSumter County Fire – Dispatch155.3175
In 159.0075
RAN 13NXDN48 EncryptedWQPE511

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Sumter County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Sumter County Fire Expired: Expired 3/20Sumter County Fire – Tactical Channel154.0025FMNWQLP745
Sumter County FireFire-Rescue155.6175156 DPLFMNWQPE511

Fire Talk-around

Fire Talk-around frequencies for Sumter County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Sumter County FireSumter County Fire – Remote Link (Americus)460.3625FMNWQLM225

EMS Dispatch

EMS Dispatch frequencies for Sumter County
AgencyDescriptionFrequency (MHz)ToneModeFCC
EMS/Medical HelicoptersAir Evac Lifeteam 86-Americus152.4125
In 157.6725
051 DPLFMNWRAK222
Sumter County EMS Expired: Expired 3/21Sumter County EMS – Dispatch155.3850
In 150.8050
054 DPLFMNKXK294

Hospitals & Medical

Hospitals & Medical frequencies for Sumter County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Sumter County Hospital Expired: Expired 6/21Patient Reports155.2950114.8 PLFMNKXK294

Sumter County Public Safety

Sumter County Public Safety talkgroups
AgencyDescriptionTalkgroupHexMode
Sumter County FireSumter County Fire – Dispatch (Countywide)201c9D

Nearest trunked radio sites

Distances are measured from the center of Plains.

Plains · Sumter County Public Safety
Site 3 (hex 3) · about 1 mi away
Control 151.25
Voice 151.1075, 159.0975, 159.1725
Americus · Sumter County Public Safety
Site 1 (hex 1) · about 7 mi away
Control 151.355
Voice 151.0025, 154.055, 154.3325
Leslie · Sumter County Public Safety
Site 2 (hex 2) · about 23 mi away
Control 151.4825
Voice 151.0175, 159.2025, 159.465

Common questions

What frequency does EMS or the ambulance service use in Plains?

We do not have a EMS dispatch channel listed specifically for Plains. The county-level EMS dispatch channels in the same county: EMS/Medical Helicopters 152.4125 MHz, narrow FM, 051 DPL.

Do fire departments and EMS use a trunked radio system in Plains?

Yes. The county-level systems that cover Plains are Fire and EMS talkgroups are listed for Sumter County Public Safety: 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Plains?

The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN48 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Plains?

For Plains, start with the Plains site of Sumter County Public Safety. Its control channels are 151.25 MHz. Program a control channel first; the scanner finds the voice channels from it.