About Rhine Fire and EMS Frequencies
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (NXDN48), which needs a scanner that decodes that mode.
- 1 listed entry is marked encrypted. No scanner can decode encrypted audio.
Data updated .
Dodge County channels that also cover Rhine
Fire Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Dodge County Fire | Fire Association | 155.9850 In 158.8425 | 167.9 PL | FMN | WQRP697 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Dodge County EMS | Dodge County EMS – Tactical Channel (input is 49 RAN) | 156.2325 In 159.0975 | RAN 28 | NXDN48 Encrypted | KNDN803 |
EMS Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Dodge County EMS | Dodge County EMS – Alternate | 157.4500 | 167.9 PL | FMN | — |
Nearest trunked radio sites
Distances are measured from the center of Rhine.
Cordele · Crisp County Public Safety (P25)
Project 25 · RFSS 1 · Site 2 (hex 2) · NAC 940 · about 34 mi away
Control 856.7875, 857.3375
Voice 854.9375, 854.9625, 855.4625, 856.8125
Tifton · Tift County Public Safety P25
Project 25 · RFSS 1 · Site 1 (hex 1) · NAC 671 · about 41 mi away
Control 856.9625, 857.4875
Voice 854.1875, 854.5125, 854.7875, 855.2375, 855.5875, 855.9375, 856.2625, 856.6125
Simulcast · Houston County Government (GA)
RFSS 1 · Site 3 (hex 3) · NAC 143 · about 44 mi away
Control 854.7875, 855.2625, 855.5375, 855.9375
Voice 854.5625, 855.0125, 855.7375, 856.3375, 856.4625, 856.9375, 857.3125, 857.4375
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What scanner do I need to listen to fire and EMS in Rhine?
The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN48 is needed for the digital conventional channels.
What are the control channels for trunked radio in Rhine?
For Rhine, start with the Cordele site of Crisp County Public Safety (P25). Its control channels are 856.7875, 857.3375 MHz. Program a control channel first; the scanner finds the voice channels from it.