Skip to content

Pitts Fire and EMS Frequencies

We do not have frequencies listed specifically for Pitts in Wilcox County, Georgia yet. Countywide channels for Wilcox County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Cordele (Crisp County Public Safety (P25)), about 14 miles away.

About Pitts Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Pitts: Wilcox County Fire 154.0550 MHz, narrow FM, 110.9 PL.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.

Data updated .

Wilcox County channels that also cover Pitts

Fire Dispatch

Fire Dispatch frequencies for Wilcox County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Wilcox County FireWilcox County Fire – Dispatch154.0550
In 150.9500
110.9 PLFMNWPET835

Nearest trunked radio sites

Distances are measured from the center of Pitts.

Cordele · Crisp County Public Safety (P25)
Project 25 · RFSS 1 · Site 2 (hex 2) · NAC 940 · about 14 mi away
Control 856.7875, 857.3375
Voice 854.9375, 854.9625, 855.4625, 856.8125
Leslie · Sumter County Public Safety
Site 2 (hex 2) · about 28 mi away
Control 151.4825
Voice 151.0175, 159.2025, 159.465
Tifton · Tift County Public Safety P25
Project 25 · RFSS 1 · Site 1 (hex 1) · NAC 671 · about 34 mi away
Control 856.9625, 857.4875
Voice 854.1875, 854.5125, 854.7875, 855.2375, 855.5875, 855.9375, 856.2625, 856.6125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Pitts?

We do not have a fire dispatch channel listed specifically for Pitts. The county-level fire dispatch channels in the same county: Wilcox County Fire 154.0550 MHz, narrow FM, 110.9 PL.

What scanner do I need to listen to fire and EMS in Pitts?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Pitts?

For Pitts, start with the Cordele site of Crisp County Public Safety (P25). Its control channels are 856.7875, 857.3375 MHz. Program a control channel first; the scanner finds the voice channels from it.