Fitzgerald also extends into Irwin County.
About Fitzgerald Fire and EMS Frequencies
Quick answer: Fire dispatch for Fitzgerald: Fitzgerald Fire 154.4000 MHz, NXDN96, RAN 43. County-level ems dispatch that covers Fitzgerald: Ben Hill County EMS 155.2350 MHz, NXDN96, RAN 43.
- 4 conventional channels use a digital mode (NXDN96), which needs a scanner that decodes that mode.
Data updated .
Fitzgerald conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Fitzgerald Fire | Fitzgerald Fire – Dispatch | 154.4000 In 159.0150 | RAN 43 | NXDN96 | WNPC812 |
Ben Hill County channels that also cover Fitzgerald
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Ben Hill County Fire | Ben Hill County Fire – Dispatch | 155.7150 In 153.9500 | RAN 43 | NXDN96 | WPZN994 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Ben Hill County EMS | Ben Hill County EMS – Dispatch | 155.2350 In 151.2650 | RAN 43 | NXDN96 | WNVR403 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Ben Hill County EMS | Ben Hill County EMS – Tactical Channel | 155.2950 | RAN 43 | NXDN96 | WNVR403 |
Nearest trunked radio sites
Distances are measured from the center of Fitzgerald.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Fitzgerald?
Fire dispatch channels listed for Fitzgerald: Fitzgerald Fire 154.4000 MHz, NXDN96, RAN 43.
What frequency does EMS or the ambulance service use in Fitzgerald?
We do not have a EMS dispatch channel listed specifically for Fitzgerald. The county-level EMS dispatch channels in the same county: Ben Hill County EMS 155.2350 MHz, NXDN96, RAN 43.
What scanner do I need to listen to fire and EMS in Fitzgerald?
A scanner that decodes NXDN96 is needed for the digital conventional channels.
What are the control channels for trunked radio in Fitzgerald?
For Fitzgerald, start with the Tifton site of Tift County Public Safety P25. Its control channels are 856.9625, 857.4875 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Fitzgerald fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Fitzgerald are marked encrypted.