About Kit Carson County Fire and EMS Frequencies
Quick answer: EMS dispatch for Kit Carson County: Kit Carson County EMS 462.9500 MHz, narrow FM, 94.8 PL. Trunked: State of Colorado DTRS, for example Kit Carson County Fire talkgroup 424 (hex 1a8).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: State of Colorado DTRS: 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Kit Carson County, start with the Flagler site of State of Colorado DTRS. Its control channels: 852.2875, 852.5625, 852.8125 MHz.
Data updated .
Kit Carson County conventional frequencies
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Kit Carson County EMS | Kit Carson County EMS – Flagler | 462.9500 In 467.9500 | 94.8 PL | FMN | KAQ249 |
| Kit Carson County EMS | Kit Carson County EMS – Bethune | 462.9500 In 467.9500 | 136.5 PL | FMN | KAQ249 |
Kit Carson County trunked talkgroups
State of Colorado DTRS
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Kit Carson County Fire | Kit Carson County Fire – Dispatch | 424 | 1a8 | D |
| Kit Carson County Fire | Kit Carson County Fire – Fire Ground | 425 | 1a9 | D |
| Kit Carson County Fire | Hazmat | 427 | 1ab | D |
| Kit Carson County EMS | Kit Carson County EMS – Dispatch | 422 | 1a6 | D |
| Kit Carson County EMS | Kit Carson County EMS – Tactical Channel | 423 | 1a7 | D |
Radio system sites in Kit Carson County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Kit Carson County
Common questions
What frequency does EMS or the ambulance service use in Kit Carson County?
EMS dispatch channels listed for Kit Carson County: Kit Carson County EMS 462.9500 MHz, narrow FM, 94.8 PL.
Do fire departments and EMS use a trunked radio system in Kit Carson County?
Yes. Fire and EMS talkgroups are listed for State of Colorado DTRS: 5 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Kit Carson County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Kit Carson County?
For Kit Carson County, start with the Flagler site of State of Colorado DTRS. Its control channels are 852.2875, 852.5625, 852.8125, 853.6 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Kit Carson County fire and EMS frequencies encrypted?
None of the 2 conventional frequencies listed for Kit Carson County are marked encrypted.
Are Kit Carson County fire and EMS talkgroups encrypted?
None of the 5 talkgroups listed for Kit Carson County are marked encrypted.