About Burlington Fire and EMS Frequencies
Quick answer: County-level ems dispatch that covers Burlington: Kit Carson County EMS 462.9500 MHz, narrow FM, 94.8 PL. Trunked: State of Colorado DTRS, for example Burlington Hospital talkgroup 127 (hex 7f).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: State of Colorado DTRS: 1 talkgroup; State of Colorado DTRS: 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Burlington, start with the Bethune site of State of Colorado DTRS, about 7 miles away. Its control channels: 851.7125, 851.9125, 852.6875 MHz.
Data updated .
Burlington trunked talkgroups
State of Colorado DTRS
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Burlington Hospital | Kit Carson County Memorial Hospital | 127 | 7f | D |
Kit Carson County channels that also cover Burlington
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Kit Carson County EMS | Kit Carson County EMS – Flagler | 462.9500 In 467.9500 | 94.8 PL | FMN | KAQ249 |
| Kit Carson County EMS | Kit Carson County EMS – Bethune | 462.9500 In 467.9500 | 136.5 PL | FMN | KAQ249 |
State of Colorado DTRS
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Kit Carson County Fire | Kit Carson County Fire – Dispatch | 424 | 1a8 | D |
| Kit Carson County Fire | Kit Carson County Fire – Fire Ground | 425 | 1a9 | D |
| Kit Carson County Fire | Hazmat | 427 | 1ab | D |
| Kit Carson County EMS | Kit Carson County EMS – Dispatch | 422 | 1a6 | D |
| Kit Carson County EMS | Kit Carson County EMS – Tactical Channel | 423 | 1a7 | D |
Nearest trunked radio sites
Distances are measured from the center of Burlington.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does EMS or the ambulance service use in Burlington?
We do not have a EMS dispatch channel listed specifically for Burlington. The county-level EMS dispatch channels in the same county: Kit Carson County EMS 462.9500 MHz, narrow FM, 94.8 PL.
Do fire departments and EMS use a trunked radio system in Burlington?
Yes. Fire and EMS talkgroups are listed for State of Colorado DTRS: 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Burlington?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Burlington?
For Burlington, start with the Bethune site of State of Colorado DTRS. Its control channels are 851.7125, 851.9125, 852.6875, 852.9125 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Burlington fire and EMS talkgroups encrypted?
None of the 1 talkgroups listed for Burlington are marked encrypted.