Skip to content

Park County Fire and EMS Frequencies

Park County in Wyoming has 5 countywide conventional frequencies and 4 countywide talkgroups in our database. Use the list of 7 cities and communities below for local fire departments and EMS agencies.

About Park County Fire and EMS Frequencies

Quick answer: Fire dispatch for Park County: Meeteese Fire 154.2500 MHz, narrow FM, no tone; Park County Fire 155.7900 MHz, narrow FM, CSQ. Trunked: WyoLink, for example Park County Fire talkgroup 13912 (hex 3658).

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: WyoLink: 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Park County, start with the Cedar Mountain site of WyoLink. Its control channels: 155.6925, 156.165 MHz.

Data updated .

Park County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Park County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Meeteese FireMeeteese Fire154.2500FMNKNFT983
Meeteese FireMeeteese Police/Fire/DPW – Common155.9550FMNKNFS538
Park County FirePark County Fire/EMS (previously 100.0 PL, now CSQ)155.7900
In 154.7700
CSQFMNWZX510

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Park County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Clark FireClark Fire Department Tactical155.8125CSQFMNWQNU210

EMS Talk-around

EMS Talk-around frequencies for Park County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Meeteese EMSMeeteese EMS155.3400FMNKNFU404

Park County trunked talkgroups

WyoLink

WyoLink talkgroups
AgencyDescriptionTalkgroupHexMode
Park County FireFire 2 Powell139123658D
Park County EMSPark County EMS – Dispatch139133659D
Park County EMSPark County EMS – Dispatch13914365aD
Park County EMSCody Regional Ambulance Paging201214e99D

Radio system sites in Park County

Program the control channel first; your scanner finds the voice channels from it.

Cedar Mountain · WyoLink
RFSS 2 · Site 10 (hex A) · NAC 1A9
Control 155.6925, 156.165
Voice 156.2325, 169.625, 169.775
Dead Indian Hill · WyoLink
RFSS 2 · Site 11 (hex B) · NAC 1A0
Control 153.2525, 153.4625
Voice 153.4925, 170.8125, 172.1375
Meeteese · WyoLink
RFSS 2 · Site 25 (hex 19) · NAC 1A9
Control 151.2575, 151.2725
Voice 153.995, 154.9275, 155.685
McCullough Peaks · WyoLink
RFSS 2 · Site 41 (hex 29) · NAC 1A9
Control 152.51, 152.54
Voice 152.63, 152.66, 152.75, 152.81
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Park County

Common questions

What frequency does the fire department use in Park County?

Fire dispatch channels listed for Park County: Meeteese Fire 154.2500 MHz, narrow FM, no tone; Park County Fire 155.7900 MHz, narrow FM, CSQ.

Do fire departments and EMS use a trunked radio system in Park County?

Yes. Fire and EMS talkgroups are listed for WyoLink: 4 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Park County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Park County?

For Park County, start with the Cedar Mountain site of WyoLink. Its control channels are 155.6925, 156.165 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Park County fire and EMS frequencies encrypted?

None of the 5 conventional frequencies listed for Park County are marked encrypted.

Are Park County fire and EMS talkgroups encrypted?

None of the 4 talkgroups listed for Park County are marked encrypted.