Skip to content

Goshen County Fire and EMS Frequencies

Goshen County in Wyoming has 4 countywide conventional frequencies and 13 countywide talkgroups in our database. Use the list of 8 cities and communities below for local fire departments and EMS agencies.

About Goshen County Fire and EMS Frequencies

Quick answer: Fire dispatch for Goshen County: Goshen County Fire 154.2050 MHz, narrow FM, 173.8 PL. Trunked: WyoLink, for example Goshen County Fire talkgroup 1010 (hex 3f2).

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: WyoLink: 13 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Goshen County, start with the Jay Em site of WyoLink. Its control channels: 154.86, 154.965 MHz.

Data updated .

Goshen County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Goshen County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Goshen County FireFire/EMS North Paging154.2050
In 156.0000
173.8 PLFMNWNDK989
Goshen County FireFire/EMS South Paging154.2050
In 156.0000
100.0 PLFMNWNDK989
Goshen County FireLingle/Ft. Laramie Fire/EMS Paging154.2050
In 156.0000
123.0 PLFMNWNDK989
Goshen County FireLaGrange Rural Fire District154.4150
In 153.8300
FMNWPKH628

Goshen County trunked talkgroups

WyoLink

WyoLink talkgroups
AgencyDescriptionTalkgroupHexMode
Goshen County FireGoshen County Fire – Dispatch10103f2D
Goshen County FireGoshen County Fire – Fire Ground10133f5D
Goshen County FireGoshen County Fire – Fire Ground10143f6D
Goshen County FirePrairie Center Fire10193fbD
Goshen County FireJay Em Fire10203fcD
Goshen County FireHawk Spring Fire10213fdD
Goshen County FireGoshen County Fire – Alternate10113f3D
Goshen County FireGoshen County Fire – Alternate10123f4D
Goshen County EMSGoshen County EMS – Dispatch1024400D
Goshen County EMSGoshen County EMS – Alternate1025401D
Goshen County EMSGoshen County EMS – Alternate1026402D
Goshen County EMSGoshen County EMS – Alternate1027403D
Goshen County EMSGoshen County EMS – Alternate1028404D

Radio system sites in Goshen County

Program the control channel first; your scanner finds the voice channels from it.

Jay Em · WyoLink
RFSS 1 · Site 45 (hex 2D) · NAC 1A0
Control 154.86, 154.965
Voice 155.085, 155.1975, 155.5125
Torrington · WyoLink
RFSS 1 · Site 46 (hex 2E) · NAC 1A9
Control 151.2275, 151.46
Voice 150.8825, 151.0025, 155.745
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Goshen County

Common questions

What frequency does the fire department use in Goshen County?

Fire dispatch channels listed for Goshen County: Goshen County Fire 154.2050 MHz, narrow FM, 173.8 PL.

Do fire departments and EMS use a trunked radio system in Goshen County?

Yes. Fire and EMS talkgroups are listed for WyoLink: 13 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Goshen County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Goshen County?

For Goshen County, start with the Jay Em site of WyoLink. Its control channels are 154.86, 154.965 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Goshen County fire and EMS frequencies encrypted?

None of the 4 conventional frequencies listed for Goshen County are marked encrypted.

Are Goshen County fire and EMS talkgroups encrypted?

None of the 13 talkgroups listed for Goshen County are marked encrypted.