About Yoder Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Yoder: Goshen County Fire 154.2050 MHz, narrow FM, 173.8 PL. Trunked: WyoLink, for example Yoder Fire talkgroup 1018 (hex 3fa).
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: WyoLink: 1 talkgroup; WyoLink: 13 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Yoder, start with the Torrington site of WyoLink, about 12 miles away. Its control channels: 151.2275, 151.46 MHz.
Data updated .
Yoder trunked talkgroups
WyoLink
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Yoder Fire | Yoder Fire – Fire Ground | 1018 | 3fa | D |
Goshen County channels that also cover Yoder
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Goshen County Fire | Fire/EMS North Paging | 154.2050 In 156.0000 | 173.8 PL | FMN | WNDK989 |
| Goshen County Fire | Fire/EMS South Paging | 154.2050 In 156.0000 | 100.0 PL | FMN | WNDK989 |
| Goshen County Fire | Lingle/Ft. Laramie Fire/EMS Paging | 154.2050 In 156.0000 | 123.0 PL | FMN | WNDK989 |
| Goshen County Fire | LaGrange Rural Fire District | 154.4150 In 153.8300 | FMN | WPKH628 |
WyoLink
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Goshen County Fire | Goshen County Fire – Dispatch | 1010 | 3f2 | D |
| Goshen County Fire | Goshen County Fire – Fire Ground | 1013 | 3f5 | D |
| Goshen County Fire | Goshen County Fire – Fire Ground | 1014 | 3f6 | D |
| Goshen County Fire | Prairie Center Fire | 1019 | 3fb | D |
| Goshen County Fire | Jay Em Fire | 1020 | 3fc | D |
| Goshen County Fire | Hawk Spring Fire | 1021 | 3fd | D |
| Goshen County Fire | Goshen County Fire – Alternate | 1011 | 3f3 | D |
| Goshen County Fire | Goshen County Fire – Alternate | 1012 | 3f4 | D |
| Goshen County EMS | Goshen County EMS – Dispatch | 1024 | 400 | D |
| Goshen County EMS | Goshen County EMS – Alternate | 1025 | 401 | D |
| Goshen County EMS | Goshen County EMS – Alternate | 1026 | 402 | D |
| Goshen County EMS | Goshen County EMS – Alternate | 1027 | 403 | D |
| Goshen County EMS | Goshen County EMS – Alternate | 1028 | 404 | D |
Nearest trunked radio sites
Distances are measured from the center of Yoder.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Yoder?
We do not have a fire dispatch channel listed specifically for Yoder. The county-level fire dispatch channels in the same county: Goshen County Fire 154.2050 MHz, narrow FM, 173.8 PL.
Do fire departments and EMS use a trunked radio system in Yoder?
Yes. Fire and EMS talkgroups are listed for WyoLink: 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Yoder?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Yoder?
For Yoder, start with the Torrington site of WyoLink. Its control channels are 151.2275, 151.46 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Yoder fire and EMS talkgroups encrypted?
None of the 1 talkgroups listed for Yoder are marked encrypted.