About Converse County Fire and EMS Frequencies
Quick answer: Fire dispatch for Converse County: Converse County Fire 154.4450 MHz, narrow FM, 107.2 PL. Trunked: WyoLink, for example Converse County Fire talkgroup 14108 (hex 371c).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: WyoLink: 7 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Converse County, start with the Morton Hill site of WyoLink. Its control channels: 150.775, 150.79 MHz.
Data updated .
Converse County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Converse County Fire | Converse County Fire – Dispatch | 154.4450 | 107.2 PL | FMN | WZW967 |
Fire Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Converse County Fire | Highway Department / Rural Fire Operations | 45.2000 | FMN | WNMH877 |
Converse County trunked talkgroups
WyoLink
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Converse County Fire | Fire/EMS Operations | 14108 | 371c | D |
| Converse County Fire | Converse County Fire – Tactical Channel | 14111 | 371f | D |
| Converse County Fire | Converse County Fire – Tactical Channel | 14112 | 3720 | D |
| Converse County Fire | Converse County Fire – Tactical Channel | 14113 | 3721 | D |
| Converse County Fire | Search and Rescue Tactical | 14114 | 3722 | D |
| Converse County Fire | Rural Fire Tactical | 14121 | 3729 | D |
| Converse County Hospital | Memorial Hospital of Converse County | 14101 | 3715 | D |
Radio system sites in Converse County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Converse County
Common questions
What frequency does the fire department use in Converse County?
Fire dispatch channels listed for Converse County: Converse County Fire 154.4450 MHz, narrow FM, 107.2 PL.
Do fire departments and EMS use a trunked radio system in Converse County?
Yes. Fire and EMS talkgroups are listed for WyoLink: 7 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Converse County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Converse County?
For Converse County, start with the Morton Hill site of WyoLink. Its control channels are 150.775, 150.79 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Converse County fire and EMS frequencies encrypted?
None of the 2 conventional frequencies listed for Converse County are marked encrypted.
Are Converse County fire and EMS talkgroups encrypted?
None of the 7 talkgroups listed for Converse County are marked encrypted.