Skip to content

Esterbrook Fire and EMS Frequencies

We do not have frequencies listed specifically for Esterbrook in Converse County, Wyoming yet. Countywide channels for Converse County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Pine Ridge (WyoLink), about 18 miles away.

About Esterbrook Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Esterbrook: Converse County Fire 154.4450 MHz, narrow FM, 107.2 PL. Trunked: WyoLink, for example Converse County Fire talkgroup 14108 (hex 371c).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: WyoLink: 7 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Esterbrook, start with the Pine Ridge site of WyoLink, about 18 miles away. Its control channels: 151.055, 156.2025 MHz.

Data updated .

Converse County channels that also cover Esterbrook

Fire Dispatch

Fire Dispatch frequencies for Converse County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Converse County FireConverse County Fire – Dispatch154.4450107.2 PLFMNWZW967

Fire Talk-around

Fire Talk-around frequencies for Converse County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Converse County FireHighway Department / Rural Fire Operations45.2000FMNWNMH877

WyoLink

WyoLink talkgroups
AgencyDescriptionTalkgroupHexMode
Converse County FireFire/EMS Operations14108371cD
Converse County FireConverse County Fire – Tactical Channel14111371fD
Converse County FireConverse County Fire – Tactical Channel141123720D
Converse County FireConverse County Fire – Tactical Channel141133721D
Converse County FireSearch and Rescue Tactical141143722D
Converse County FireRural Fire Tactical141213729D
Converse County HospitalMemorial Hospital of Converse County141013715D

Nearest trunked radio sites

Distances are measured from the center of Esterbrook.

Pine Ridge · WyoLink
RFSS 2 · Site 2 (hex 2) · NAC 1A0 · about 18 mi away
Control 151.055, 156.2025
Voice 150.92, 151.205, 153.6425
Orin Junction · WyoLink
RFSS 2 · Site 30 (hex 1E) · NAC 1A0 · about 20 mi away
Control 154.025, 154.13
Voice 154.2275, 154.3175, 154.3925
Douglas · WyoLink
RFSS 2 · Site 38 (hex 26) · NAC 1A0 · about 25 mi away
Control 156.06, 156.21
Voice 151.3625, 154.2725, 154.9125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Esterbrook?

We do not have a fire dispatch channel listed specifically for Esterbrook. The county-level fire dispatch channels in the same county: Converse County Fire 154.4450 MHz, narrow FM, 107.2 PL.

Do fire departments and EMS use a trunked radio system in Esterbrook?

Yes. The county-level systems that cover Esterbrook are Fire and EMS talkgroups are listed for WyoLink: 7 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Esterbrook?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Esterbrook?

For Esterbrook, start with the Pine Ridge site of WyoLink. Its control channels are 151.055, 156.2025 MHz. Program a control channel first; the scanner finds the voice channels from it.