Skip to content

Carbon County Fire and EMS Frequencies

Carbon County in Wyoming has 3 countywide conventional frequencies and 9 countywide talkgroups in our database. Use the list of 12 cities and communities below for local fire departments and EMS agencies.

About Carbon County Fire and EMS Frequencies

Quick answer: Fire dispatch for Carbon County: Carbon County Fire 155.8050 MHz, narrow FM, 100.0 PL. EMS dispatch for Carbon County: Carbon County EMS 154.3850 MHz, narrow FM, 131.8 PL. Trunked: WyoLink, for example Carbon County Fire talkgroup 810 (hex 32a).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.
  • Trunked radio systems that carry fire and EMS traffic here: WyoLink: 9 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Carbon County, start with the Baggs Hill site of WyoLink. Its control channels: 150.8975, 150.9425 MHz.

Data updated .

Carbon County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Carbon County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Carbon County FireCarbon County Fire Dispatch155.8050
In 158.7600
100.0 PLFMNWNHA845
Carbon County FireCarbon County Fire Dispatch P25155.8050
In 158.7600
NAC F00P25WNHA845

EMS Dispatch

EMS Dispatch frequencies for Carbon County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Carbon County EMSSouth Central Wyoming EMS154.3850
In 153.7700
131.8 PLFMNKB69636

Carbon County trunked talkgroups

WyoLink

WyoLink talkgroups
AgencyDescriptionTalkgroupHexMode
Carbon County FireCarbon County Fire – Dispatch81032aD
Carbon County FireFire Platte Valley82933dD
Carbon County FireEast83033eD
Carbon County FireWest83133fD
Carbon County EMSCarbon County EMS – Dispatch809329D
Carbon County EMSEMS Northwest825339D
Carbon County EMSEMS Northeast82633aD
Carbon County EMSEMS Southeast82733bD
Carbon County EMSEMS Southwest82833cD

Radio system sites in Carbon County

Program the control channel first; your scanner finds the voice channels from it.

Baggs Hill · WyoLink
RFSS 1 · Site 32 (hex 20) · NAC 1A9
Control 150.8975, 150.9425
Voice 151.0325, 153.14, 153.7625
Divide Hill · WyoLink
RFSS 1 · Site 34 (hex 22) · NAC 1A0
Control 150.9725, 154.3325
Voice 151.1675, 154.25, 155.325
Nine Mile Hill · WyoLink
RFSS 1 · Site 37 (hex 25) · NAC 1A0
Control 151.1825, 151.2425, 153.74
Voice 152.75, 152.81
Rawlins · WyoLink
RFSS 1 · Site 38 (hex 26) · NAC 1A9
Control 151.1525, 154.2725, 156.06
Voice 151.3625, 155.565
Muddy Gap · WyoLink
RFSS 1 · Site 40 (hex 28) · NAC 1A9
Control 150.8825, 151.0025
Voice 151.2125, 151.4375, 151.46
Halleck Ridge · WyoLink
RFSS 1 · Site 41 (hex 29) · NAC 1A9
Control 154.0925, 154.2275
Voice 154.965, 155.655, 155.715
Shirley Mountain · WyoLink
RFSS 1 · Site 43 (hex 2B) · NAC 1A0
Control 153.83, 153.92
Voice 154.625, 156, 156.0025
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Carbon County

Common questions

What frequency does the fire department use in Carbon County?

Fire dispatch channels listed for Carbon County: Carbon County Fire 155.8050 MHz, narrow FM, 100.0 PL.

What frequency does EMS or the ambulance service use in Carbon County?

EMS dispatch channels listed for Carbon County: Carbon County EMS 154.3850 MHz, narrow FM, 131.8 PL.

Do fire departments and EMS use a trunked radio system in Carbon County?

Yes. Fire and EMS talkgroups are listed for WyoLink: 9 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Carbon County?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Carbon County?

For Carbon County, start with the Baggs Hill site of WyoLink. Its control channels are 150.8975, 150.9425 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Carbon County fire and EMS frequencies encrypted?

None of the 3 conventional frequencies listed for Carbon County are marked encrypted.

Are Carbon County fire and EMS talkgroups encrypted?

None of the 9 talkgroups listed for Carbon County are marked encrypted.