Skip to content

Sinclair Fire and EMS Frequencies

Sinclair in Carbon County, Wyoming has 1 conventional frequency and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Rawlins (WyoLink), about 6 miles away.

About Sinclair Fire and EMS Frequencies

Quick answer: Fire dispatch for Sinclair: Sinclair Fire 154.4450 MHz, narrow FM, 131.8 PL. County-level ems dispatch that covers Sinclair: Carbon County EMS 154.3850 MHz, narrow FM, 131.8 PL. Trunked: WyoLink, for example Carbon County Fire talkgroup 810 (hex 32a).

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.
  • Trunked radio systems that carry fire and EMS traffic here: WyoLink: 9 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Sinclair, start with the Rawlins site of WyoLink, about 6 miles away. Its control channels: 151.1525, 154.2725, 156.06 MHz.

Data updated .

Sinclair conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Sinclair
AgencyDescriptionFrequency (MHz)ToneModeFCC
Sinclair FireSinclair Fire154.4450131.8 PLFMNKNIU728

Carbon County channels that also cover Sinclair

Fire Dispatch

Fire Dispatch frequencies for Carbon County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Carbon County FireCarbon County Fire Dispatch155.8050
In 158.7600
100.0 PLFMNWNHA845
Carbon County FireCarbon County Fire Dispatch P25155.8050
In 158.7600
NAC F00P25WNHA845

EMS Dispatch

EMS Dispatch frequencies for Carbon County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Carbon County EMSSouth Central Wyoming EMS154.3850
In 153.7700
131.8 PLFMNKB69636

WyoLink

WyoLink talkgroups
AgencyDescriptionTalkgroupHexMode
Carbon County FireCarbon County Fire – Dispatch81032aD
Carbon County FireFire Platte Valley82933dD
Carbon County FireEast83033eD
Carbon County FireWest83133fD
Carbon County EMSCarbon County EMS – Dispatch809329D
Carbon County EMSEMS Northwest825339D
Carbon County EMSEMS Northeast82633aD
Carbon County EMSEMS Southeast82733bD
Carbon County EMSEMS Southwest82833cD

Nearest trunked radio sites

Distances are measured from the center of Sinclair.

Rawlins · WyoLink
RFSS 1 · Site 38 (hex 26) · NAC 1A9 · about 6 mi away
Control 151.1525, 154.2725, 156.06
Voice 151.3625, 155.565
Nine Mile Hill · WyoLink
RFSS 1 · Site 37 (hex 25) · NAC 1A0 · about 13 mi away
Control 151.1825, 151.2425, 153.74
Voice 152.75, 152.81
Halleck Ridge · WyoLink
RFSS 1 · Site 41 (hex 29) · NAC 1A9 · about 29 mi away
Control 154.0925, 154.2275
Voice 154.965, 155.655, 155.715
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Sinclair?

Fire dispatch channels listed for Sinclair: Sinclair Fire 154.4450 MHz, narrow FM, 131.8 PL.

What frequency does EMS or the ambulance service use in Sinclair?

We do not have a EMS dispatch channel listed specifically for Sinclair. The county-level EMS dispatch channels in the same county: Carbon County EMS 154.3850 MHz, narrow FM, 131.8 PL.

Do fire departments and EMS use a trunked radio system in Sinclair?

Yes. The county-level systems that cover Sinclair are Fire and EMS talkgroups are listed for WyoLink: 9 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Sinclair?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Sinclair?

For Sinclair, start with the Rawlins site of WyoLink. Its control channels are 151.1525, 154.2725, 156.06 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Sinclair fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Sinclair are marked encrypted.