About Campbell County Fire and EMS Frequencies
Quick answer: Fire dispatch for Campbell County: Campbell County Fire 153.9500 MHz, narrow FM, CSQ. EMS dispatch for Campbell County: Campbell County EMS 155.2950 MHz, narrow FM, CSQ. Trunked: WyoLink, for example Campbell County Fire talkgroup 14909 (hex 3a3d).
- 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: WyoLink: 7 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Campbell County, start with the Pumpkin Buttes site of WyoLink. Its control channels: 151.0175, 154.0175, 155.4975 MHz.
Data updated .
Campbell County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Campbell County Fire | Campbell County Fire Dispatch (WyoLink TG 14909) | 153.9500 In 154.4150 | CSQ | FMN | WNFD905 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Campbell County Fire | Campbell County Fire Tactical | 154.2200 | FMN | WNFD905 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Campbell County EMS | Campbell County EMS 1 Dispatch | 155.2950 In 154.7400 | CSQ | FMN | KQY856 |
EMS Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Campbell County EMS | Campbell County EMS | 152.0075 | CSQ | FMN | KQY856 |
| Campbell County EMS | Campbell County EMS | 155.3400 | CSQ | FMN | KQY856 |
| Campbell County EMS | Campbell County EMS Life Flight Helicopter | 462.4500 In 467.4500 | FMN | — |
Campbell County trunked talkgroups
WyoLink
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Campbell County Fire | Campbell County Fire – Dispatch | 14909 | 3a3d | D |
| Campbell County Fire | Fire Operations | 14926 | 3a4e | D |
| Campbell County Fire | Fire Operations | 14927 | 3a4f | D |
| Campbell County Fire | Fire Operations | 14928 | 3a50 | D |
| Campbell County Fire | Fire Training | 14929 | 3a51 | D |
| Campbell County Fire | Fire Common | 14930 | 3a52 | D |
| Campbell County EMS | Campbell County EMS – Dispatch | 14910 | 3a3e | D |
Radio system sites in Campbell County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Campbell County
Common questions
What frequency does the fire department use in Campbell County?
Fire dispatch channels listed for Campbell County: Campbell County Fire 153.9500 MHz, narrow FM, CSQ.
What frequency does EMS or the ambulance service use in Campbell County?
EMS dispatch channels listed for Campbell County: Campbell County EMS 155.2950 MHz, narrow FM, CSQ.
Do fire departments and EMS use a trunked radio system in Campbell County?
Yes. Fire and EMS talkgroups are listed for WyoLink: 7 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Campbell County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Campbell County?
For Campbell County, start with the Pumpkin Buttes site of WyoLink. Its control channels are 151.0175, 154.0175, 155.4975 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Campbell County fire and EMS frequencies encrypted?
None of the 6 conventional frequencies listed for Campbell County are marked encrypted.
Are Campbell County fire and EMS talkgroups encrypted?
None of the 7 talkgroups listed for Campbell County are marked encrypted.