About Wright Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Wright: Campbell County Fire 153.9500 MHz, narrow FM, CSQ. County-level ems dispatch that covers Wright: Campbell County EMS 155.2950 MHz, narrow FM, CSQ. Trunked: WyoLink, for example Wright EMS talkgroup 14918 (hex 3a46).
- 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: WyoLink: 1 talkgroup; WyoLink: 7 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Wright, start with the Wright site of WyoLink, about 1 miles away. Its control channels: 154.13, 154.25 MHz.
Data updated .
Wright trunked talkgroups
WyoLink
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Wright EMS | Wright EMS – Dispatch | 14918 | 3a46 | D |
Campbell County channels that also cover Wright
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Campbell County Fire | Campbell County Fire Dispatch (WyoLink TG 14909) | 153.9500 In 154.4150 | CSQ | FMN | WNFD905 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Campbell County Fire | Campbell County Fire Tactical | 154.2200 | FMN | WNFD905 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Campbell County EMS | Campbell County EMS 1 Dispatch | 155.2950 In 154.7400 | CSQ | FMN | KQY856 |
EMS Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Campbell County EMS | Campbell County EMS | 152.0075 | CSQ | FMN | KQY856 |
| Campbell County EMS | Campbell County EMS | 155.3400 | CSQ | FMN | KQY856 |
| Campbell County EMS | Campbell County EMS Life Flight Helicopter | 462.4500 In 467.4500 | FMN | — |
WyoLink
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Campbell County Fire | Campbell County Fire – Dispatch | 14909 | 3a3d | D |
| Campbell County Fire | Fire Operations | 14926 | 3a4e | D |
| Campbell County Fire | Fire Operations | 14927 | 3a4f | D |
| Campbell County Fire | Fire Operations | 14928 | 3a50 | D |
| Campbell County Fire | Fire Training | 14929 | 3a51 | D |
| Campbell County Fire | Fire Common | 14930 | 3a52 | D |
| Campbell County EMS | Campbell County EMS – Dispatch | 14910 | 3a3e | D |
Nearest trunked radio sites
Distances are measured from the center of Wright.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Wright?
We do not have a fire dispatch channel listed specifically for Wright. The county-level fire dispatch channels in the same county: Campbell County Fire 153.9500 MHz, narrow FM, CSQ.
What frequency does EMS or the ambulance service use in Wright?
We do not have a EMS dispatch channel listed specifically for Wright. The county-level EMS dispatch channels in the same county: Campbell County EMS 155.2950 MHz, narrow FM, CSQ.
Do fire departments and EMS use a trunked radio system in Wright?
Yes. Fire and EMS talkgroups are listed for WyoLink: 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Wright?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Wright?
For Wright, start with the Wright site of WyoLink. Its control channels are 154.13, 154.25 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Wright fire and EMS talkgroups encrypted?
None of the 1 talkgroups listed for Wright are marked encrypted.