Skip to content

Vernon County Fire and EMS Frequencies

Vernon County in Wisconsin has 5 countywide conventional frequencies and 2 countywide talkgroups in our database. Use the list of 30 cities and communities below for local fire departments and EMS agencies.

About Vernon County Fire and EMS Frequencies

Quick answer: Fire dispatch for Vernon County: Countywide Fire 154.1750 MHz, narrow FM, 167.9 PL. EMS dispatch for Vernon County: Emplify/Gundersen Ambulance 155.0400 MHz, narrow FM, 97.4 PL. Trunked: Wisconsin Public Safety Network (WiPSN), for example Vernon County Fire talkgroup 58866 (hex e5f2).

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Wisconsin Public Safety Network (WiPSN): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Vernon County, start with the Genoa site of WISCOM. Its control channels: 139.1625, 152.6075, 152.7125 MHz.

Data updated .

Vernon County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Vernon County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Countywide FireCounty Common/Paging154.1750
In 158.9550
167.9 PLFMNWNLF959
Countywide FireCounty Fire154.8600
In 158.8800
136.5 PLFMNWQEB750

EMS Dispatch

EMS Dispatch frequencies for Vernon County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Emplify/Gundersen AmbulanceEmplify/Gundersen Ambulance – Dispatch155.0400
In 158.9625
97.4 PLFMNWPZT300

EMS Talk-around

EMS Talk-around frequencies for Vernon County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Emplify/Gundersen AmbulanceSimplex155.235097.4 PLFMNWPZT300
Local GovernmentReadstown EMS155.9400
In 158.9400
114.8 PLFMNWPMK884

Vernon County trunked talkgroups

Wisconsin Public Safety Network (WiPSN)

Wisconsin Public Safety Network (WiPSN) talkgroups
AgencyDescriptionTalkgroupHexMode
Vernon County FireVernon Fire Tactical58866e5f2D
Vernon County FireVernon Fire Tactical58867e5f3D

Radio system sites in Vernon County

Program the control channel first; your scanner finds the voice channels from it.

Genoa · WISCOM
RFSS 1 · Site 89 (hex 59) · NAC B08
Control 139.1625, 152.6075, 152.7125
Voice 151.01, 155.73
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Vernon County

Common questions

What frequency does the fire department use in Vernon County?

Fire dispatch channels listed for Vernon County: Countywide Fire 154.1750 MHz, narrow FM, 167.9 PL.

What frequency does EMS or the ambulance service use in Vernon County?

EMS dispatch channels listed for Vernon County: Emplify/Gundersen Ambulance 155.0400 MHz, narrow FM, 97.4 PL.

Do fire departments and EMS use a trunked radio system in Vernon County?

Yes. Fire and EMS talkgroups are listed for Wisconsin Public Safety Network (WiPSN): 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Vernon County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Vernon County?

For Vernon County, start with the Genoa site of WISCOM. Its control channels are 139.1625, 152.6075, 152.7125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Vernon County fire and EMS frequencies encrypted?

None of the 5 conventional frequencies listed for Vernon County are marked encrypted.

Are Vernon County fire and EMS talkgroups encrypted?

None of the 2 talkgroups listed for Vernon County are marked encrypted.