About Clinton Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Clinton: Countywide Fire 154.1750 MHz, narrow FM, 167.9 PL. County-level ems dispatch that covers Clinton: Emplify/Gundersen Ambulance 155.0400 MHz, narrow FM, 97.4 PL. Trunked: Wisconsin Public Safety Network (WiPSN), for example Vernon County Fire talkgroup 58866 (hex e5f2).
- 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Wisconsin Public Safety Network (WiPSN): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Clinton, start with the Ridgeville site of WISCOM, about 16 miles away. Its control channels: 139.6125, 152.2025, 152.5775 MHz.
Data updated .
Vernon County channels that also cover Clinton
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Countywide Fire | County Common/Paging | 154.1750 In 158.9550 | 167.9 PL | FMN | WNLF959 |
| Countywide Fire | County Fire | 154.8600 In 158.8800 | 136.5 PL | FMN | WQEB750 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Emplify/Gundersen Ambulance | Emplify/Gundersen Ambulance – Dispatch | 155.0400 In 158.9625 | 97.4 PL | FMN | WPZT300 |
EMS Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Emplify/Gundersen Ambulance | Simplex | 155.2350 | 97.4 PL | FMN | WPZT300 |
| Local Government | Readstown EMS | 155.9400 In 158.9400 | 114.8 PL | FMN | WPMK884 |
Wisconsin Public Safety Network (WiPSN)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Vernon County Fire | Vernon Fire Tactical | 58866 | e5f2 | D |
| Vernon County Fire | Vernon Fire Tactical | 58867 | e5f3 | D |
Nearest trunked radio sites
Distances are measured from the center of Clinton.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Clinton?
We do not have a fire dispatch channel listed specifically for Clinton. The county-level fire dispatch channels in the same county: Countywide Fire 154.1750 MHz, narrow FM, 167.9 PL.
What frequency does EMS or the ambulance service use in Clinton?
We do not have a EMS dispatch channel listed specifically for Clinton. The county-level EMS dispatch channels in the same county: Emplify/Gundersen Ambulance 155.0400 MHz, narrow FM, 97.4 PL.
Do fire departments and EMS use a trunked radio system in Clinton?
Yes. The county-level systems that cover Clinton are Fire and EMS talkgroups are listed for Wisconsin Public Safety Network (WiPSN): 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Clinton?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Clinton?
For Clinton, start with the Ridgeville site of WISCOM. Its control channels are 139.6125, 152.2025, 152.5775 MHz. Program a control channel first; the scanner finds the voice channels from it.