Skip to content

Taylor County Fire and EMS Frequencies

Taylor County in Wisconsin has 2 countywide conventional frequencies and 1 countywide talkgroup in our database. Use the list of 26 cities and communities below for local fire departments and EMS agencies.

About Taylor County Fire and EMS Frequencies

Quick answer: Fire dispatch for Taylor County: Taylor County Fire 154.1750 MHz, narrow FM, 88.5 PL. Trunked: WISCOM, for example Taylor County Fire talkgroup 61007 (hex ee4f).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: WISCOM: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Taylor County, start with the Perkinstown site of WISCOM. Its control channels: 139.4125, 152.0375, 152.2025 MHz.

Data updated .

Taylor County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Taylor County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Taylor County FireCounty Fire154.1750
In 158.9775
88.5 PLFMNKFB804

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Taylor County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Taylor County FireCounty Fireground154.310088.5 PLFMNWNXQ581

Taylor County trunked talkgroups

WISCOM

WISCOM talkgroups
AgencyDescriptionTalkgroupHexMode
Taylor County FireTaylor County Fire61007ee4fD

Radio system sites in Taylor County

Program the control channel first; your scanner finds the voice channels from it.

Perkinstown · WISCOM
RFSS 1 · Site 110 (hex 6E) · NAC B07
Control 139.4125, 152.0375, 152.2025
Voice 154.415, 155.655
Medford · WISCOM
RFSS 1 · Site 161 (hex A1) · NAC B06
Control 151.2275, 154.025, 154.785, 155.925
Bellinger · WISCOM
RFSS 1 · Site 162 (hex A2) · NAC B03
Control 151.0775, 151.3325, 154.665, 155.7075
Westboro · WISCOM
RFSS 1 · Site 163 (hex A3) · NAC B05
Control 155.175, 155.355, 155.67
Voice 154.875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Taylor County

Common questions

What frequency does the fire department use in Taylor County?

Fire dispatch channels listed for Taylor County: Taylor County Fire 154.1750 MHz, narrow FM, 88.5 PL.

Do fire departments and EMS use a trunked radio system in Taylor County?

Yes. Fire and EMS talkgroups are listed for WISCOM: 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Taylor County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Taylor County?

For Taylor County, start with the Perkinstown site of WISCOM. Its control channels are 139.4125, 152.0375, 152.2025 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Taylor County fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Taylor County are marked encrypted.

Are Taylor County fire and EMS talkgroups encrypted?

None of the 1 talkgroups listed for Taylor County are marked encrypted.