Skip to content

Price County Fire and EMS Frequencies

Price County in Wisconsin has 2 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 19 cities and communities below for local fire departments and EMS agencies.

About Price County Fire and EMS Frequencies

Quick answer: Fire dispatch for Price County: Price County Fire 154.3250 MHz, narrow FM, 103.5 PL.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Price County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Price County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Price County FirePrice County Fire – Dispatch154.3250
In 153.7400
103.5 PLFMNWNQF727
Price County FirePrice County Fire – Paging155.1450
In 153.9350
91.5 PLFMNWPUT354

Radio system sites in Price County

Program the control channel first; your scanner finds the voice channels from it.

Park Falls · WISCOM
RFSS 1 · Site 66 (hex 42) · NAC B07
Control 139.2125, 152.1575, 152.5325
Voice 154.34, 155.19
Spirit · WISCOM
RFSS 1 · Site 79 (hex 4F) · NAC B06
Control 139.1625, 151.415, 155.46
Voice 154.695, 154.935
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Price County

Common questions

What frequency does the fire department use in Price County?

Fire dispatch channels listed for Price County: Price County Fire 154.3250 MHz, narrow FM, 103.5 PL.

What scanner do I need to listen to fire and EMS in Price County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Price County?

For Price County, start with the Park Falls site of WISCOM. Its control channels are 139.2125, 152.1575, 152.5325 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Price County fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Price County are marked encrypted.