Skip to content

Prentice Fire and EMS Frequencies

We do not have frequencies listed specifically for Prentice in Price County, Wisconsin yet. Countywide channels for Price County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Spirit (WISCOM), about 8 miles away.

About Prentice Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Prentice: Price County Fire 154.3250 MHz, narrow FM, 103.5 PL.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Price County channels that also cover Prentice

Fire Dispatch

Fire Dispatch frequencies for Price County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Price County FirePrice County Fire – Dispatch154.3250
In 153.7400
103.5 PLFMNWNQF727
Price County FirePrice County Fire – Paging155.1450
In 153.9350
91.5 PLFMNWPUT354

Nearest trunked radio sites

Distances are measured from the center of Prentice.

Spirit · WISCOM
RFSS 1 · Site 79 (hex 4F) · NAC B06 · about 8 mi away
Control 139.1625, 151.415, 155.46
Voice 154.695, 154.935
Westboro · WISCOM
RFSS 1 · Site 163 (hex A3) · NAC B05 · about 13 mi away
Control 155.175, 155.355, 155.67
Voice 154.875
Squirrel Hill · WISCOM
RFSS 1 · Site 36 (hex 24) · NAC B09 · about 28 mi away
Control 139.1125, 152.2175, 152.6075, 152.7725
Voice 151.01
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Prentice?

We do not have a fire dispatch channel listed specifically for Prentice. The county-level fire dispatch channels in the same county: Price County Fire 154.3250 MHz, narrow FM, 103.5 PL.

What scanner do I need to listen to fire and EMS in Prentice?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Prentice?

For Prentice, start with the Spirit site of WISCOM. Its control channels are 139.1625, 151.415, 155.46 MHz. Program a control channel first; the scanner finds the voice channels from it.