Skip to content

Pierce County Fire and EMS Frequencies

Pierce County in Wisconsin has 5 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 23 cities and communities below for local fire departments and EMS agencies.

About Pierce County Fire and EMS Frequencies

Quick answer: Fire dispatch for Pierce County: Pierce County Fire 152.0075 MHz, narrow FM, 186.2 PL. EMS dispatch for Pierce County: Pierce County EMS 154.9800 MHz, narrow FM, 67.0 PL.

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Pierce County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Pierce County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Pierce County FireFire/EMS/Services Paging152.0075186.2 PLFMNWYK670
Pierce County FireRiver Falls Fire/EMS to St. Croix County Fire (for runs into St. Croix County)154.3250186.2 PLFMNWQUJ294
Pierce County FirePierce County Fire – Dispatch154.4000
In 150.7750
186.2 PLFMNWQUJ294

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Pierce County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Pierce County FirePierce County Fire – Fire Ground – Countywide154.130082.5 PLFMNWQUJ294

EMS Dispatch

EMS Dispatch frequencies for Pierce County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Pierce County EMSEMS Operations154.980067.0 PLFMNKNCP850

Radio system sites in Pierce County

Program the control channel first; your scanner finds the voice channels from it.

Prescott · WISCOM
RFSS 1 · Site 57 (hex 39) · NAC b0d
Control 139.0125, 139.6125, 139.7375
Voice 152.7425, 154.415
Bay City 700 · WISCOM
RFSS 1 · Site 247 (hex F7) · NAC B0D
Control 773.06875, 773.31875, 774.06875, 774.31875, 774.56875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Pierce County

Common questions

What frequency does the fire department use in Pierce County?

Fire dispatch channels listed for Pierce County: Pierce County Fire 152.0075 MHz, narrow FM, 186.2 PL.

What frequency does EMS or the ambulance service use in Pierce County?

EMS dispatch channels listed for Pierce County: Pierce County EMS 154.9800 MHz, narrow FM, 67.0 PL.

What scanner do I need to listen to fire and EMS in Pierce County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Pierce County?

For Pierce County, start with the Prescott site of WISCOM. Its control channels are 139.0125, 139.6125, 139.7375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Pierce County fire and EMS frequencies encrypted?

None of the 5 conventional frequencies listed for Pierce County are marked encrypted.