About Union Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Union: Pierce County Fire 152.0075 MHz, narrow FM, 186.2 PL. County-level ems dispatch that covers Union: Pierce County EMS 154.9800 MHz, narrow FM, 67.0 PL.
- 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Pierce County channels that also cover Union
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pierce County Fire | Fire/EMS/Services Paging | 152.0075 | 186.2 PL | FMN | WYK670 |
| Pierce County Fire | River Falls Fire/EMS to St. Croix County Fire (for runs into St. Croix County) | 154.3250 | 186.2 PL | FMN | WQUJ294 |
| Pierce County Fire | Pierce County Fire – Dispatch | 154.4000 In 150.7750 | 186.2 PL | FMN | WQUJ294 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pierce County Fire | Pierce County Fire – Fire Ground – Countywide | 154.1300 | 82.5 PL | FMN | WQUJ294 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pierce County EMS | EMS Operations | 154.9800 | 67.0 PL | FMN | KNCP850 |
Nearest trunked radio sites
Distances are measured from the center of Union.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Union?
We do not have a fire dispatch channel listed specifically for Union. The county-level fire dispatch channels in the same county: Pierce County Fire 152.0075 MHz, narrow FM, 186.2 PL.
What frequency does EMS or the ambulance service use in Union?
We do not have a EMS dispatch channel listed specifically for Union. The county-level EMS dispatch channels in the same county: Pierce County EMS 154.9800 MHz, narrow FM, 67.0 PL.
What scanner do I need to listen to fire and EMS in Union?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Union?
For Union, start with the Elmwood site of WISCOM. Its control channels are 139.1625, 152.1425, 152.6525 MHz. Program a control channel first; the scanner finds the voice channels from it.