Skip to content

Tipler Fire and EMS Frequencies

We do not have frequencies listed specifically for Tipler in Florence County, Wisconsin yet. Countywide channels for Florence County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Florence (WISCOM), about 15 miles away.

About Tipler Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Tipler: Florence County Fire 155.5800 MHz, narrow FM, 173.8 PL.

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Florence County channels that also cover Tipler

Fire Dispatch

Fire Dispatch frequencies for Florence County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Florence County FireFire/EMS155.5800
In 158.7900
173.8 PLFMNKTK568

Fire Talk-around

Fire Talk-around frequencies for Florence County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Florence County FireHazmat154.2200131.8 PLFMNWQAA862

EMS Talk-around

EMS Talk-around frequencies for Florence County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Florence County EMSRescue Squad155.9850FMNWQCN290

Nearest trunked radio sites

Distances are measured from the center of Tipler.

Florence · WISCOM
RFSS 1 · Site 136 (hex 88) · NAC B0C · about 15 mi away
Control 151.385, 152.5325, 152.7425
Voice 151.07, 154.815
Fence · WISCOM
RFSS 1 · Site 28 (hex 1C) · NAC B03 · about 17 mi away
Control 139.0875, 139.2125, 152.6525
Voice 151.295, 155.07
Phelps · WISCOM
RFSS 1 · Site 26 (hex 1A) · NAC B09 · about 25 mi away
Control 152.6375, 155.565, 155.9475
Voice 151.04, 154.875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Tipler?

We do not have a fire dispatch channel listed specifically for Tipler. The county-level fire dispatch channels in the same county: Florence County Fire 155.5800 MHz, narrow FM, 173.8 PL.

What scanner do I need to listen to fire and EMS in Tipler?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Tipler?

For Tipler, start with the Florence site of WISCOM. Its control channels are 151.385, 152.5325, 152.7425 MHz. Program a control channel first; the scanner finds the voice channels from it.