Skip to content

Ross Fire and EMS Frequencies

Ross in Forest County, Wisconsin has 1 conventional frequency and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Crandon (WISCOM), about 13 miles away.

About Ross Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Ross: Forest County Fire 155.8950 MHz, narrow FM, 127.3 PL. County-level ems dispatch that covers Ross: United Area Rescue Squad (Wabeno) 152.0075 MHz, narrow FM, no tone.

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Ross conventional frequencies

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Ross
AgencyDescriptionFrequency (MHz)ToneModeFCC
Ross FireNewald Fireground154.1300127.3 PLFMNWPQJ771

Forest County channels that also cover Ross

Fire Dispatch

Fire Dispatch frequencies for Forest County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Forest County FireForest County Fire – Dispatch155.8950
In 158.8950
127.3 PLFMNKNGB665

EMS Dispatch

EMS Dispatch frequencies for Forest County
AgencyDescriptionFrequency (MHz)ToneModeFCC
United Area Rescue Squad (Wabeno)Rescue Squad152.0075FMNKIC478

EMS Tactical

EMS Tactical frequencies for Forest County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Forest County EMSFire/EMS Carter155.8200
In 153.9650
127.3 PLFMNKNGB665

Nearest trunked radio sites

Distances are measured from the center of Ross.

Crandon · WISCOM
RFSS 1 · Site 27 (hex 1B) · NAC B06 · about 13 mi away
Control 139.7375, 151.235, 152.8175
Voice 154.16, 155.325
Fence · WISCOM
RFSS 1 · Site 28 (hex 1C) · NAC B03 · about 15 mi away
Control 139.0875, 139.2125, 152.6525
Voice 151.295, 155.07
Florence · WISCOM
RFSS 1 · Site 136 (hex 88) · NAC B0C · about 24 mi away
Control 151.385, 152.5325, 152.7425
Voice 151.07, 154.815
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Ross?

We do not have a fire dispatch channel listed specifically for Ross. The county-level fire dispatch channels in the same county: Forest County Fire 155.8950 MHz, narrow FM, 127.3 PL.

What frequency does EMS or the ambulance service use in Ross?

We do not have a EMS dispatch channel listed specifically for Ross. The county-level EMS dispatch channels in the same county: United Area Rescue Squad (Wabeno) 152.0075 MHz, narrow FM, no tone.

What scanner do I need to listen to fire and EMS in Ross?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Ross?

For Ross, start with the Crandon site of WISCOM. Its control channels are 139.7375, 151.235, 152.8175 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Ross fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Ross are marked encrypted.