About Florence County Fire and EMS Frequencies
Quick answer: Fire dispatch for Florence County: Florence County Fire 155.5800 MHz, narrow FM, 173.8 PL.
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Florence County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Florence County Fire | Fire/EMS | 155.5800 In 158.7900 | 173.8 PL | FMN | KTK568 |
Fire Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Florence County Fire | Hazmat | 154.2200 | 131.8 PL | FMN | WQAA862 |
EMS Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Florence County EMS | Rescue Squad | 155.9850 | FMN | WQCN290 |
Radio system sites in Florence County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Florence County
Common questions
What frequency does the fire department use in Florence County?
Fire dispatch channels listed for Florence County: Florence County Fire 155.5800 MHz, narrow FM, 173.8 PL.
What scanner do I need to listen to fire and EMS in Florence County?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Florence County?
For Florence County, start with the Fence site of WISCOM. Its control channels are 139.0875, 139.2125, 152.6525 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Florence County fire and EMS frequencies encrypted?
None of the 3 conventional frequencies listed for Florence County are marked encrypted.