Skip to content

Douglas County Fire and EMS Frequencies

Douglas County in Wisconsin has 3 countywide conventional frequencies and 5 countywide talkgroups in our database. Use the list of 19 cities and communities below for local fire departments and EMS agencies.

About Douglas County Fire and EMS Frequencies

Quick answer: Fire dispatch for Douglas County: Douglas County Fire 154.3700 MHz, narrow FM, 77.0 PL. Trunked: WISCOM, for example Douglas County Fire talkgroup 16005 (hex 3e85).

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: WISCOM: 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Douglas County, start with the Bennett site of WISCOM. Its control channels: 139.1625, 139.3625, 151.115 MHz.

Data updated .

Douglas County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Douglas County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Douglas County FireDouglas County Fire – Dispatch154.3700
In 153.8900
77.0 PLFMNWRB471

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Douglas County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Douglas County FireDouglas County Fire – Fire Ground155.385077.0 PLFMNWRB471

Hospitals & Medical

Hospitals & Medical frequencies for Douglas County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Douglas County HospitalEMS to Superior Hospital155.3400151.4 PLFMNKNBT423

Douglas County trunked talkgroups

WISCOM

WISCOM talkgroups
AgencyDescriptionTalkgroupHexMode
Douglas County FireDouglas County Paging160053e85D
Douglas County FireDouglas County Fire160073e87D
Douglas County FireDouglas County Fire160083e88D
Douglas County EMSDouglas County EMS160063e86D
Douglas County EMSMayo Clinic Ambulance Service160263e9aD

Radio system sites in Douglas County

Program the control channel first; your scanner finds the voice channels from it.

Bennett · WISCOM
RFSS 1 · Site 59 (hex 3B) · NAC B05
Control 139.1625, 139.3625, 151.115
Voice 154.325, 155.295
Superior · WISCOM
RFSS 1 · Site 72 (hex 48) · NAC B0C
Control 151.445, 152.0375, 152.5625
Voice 150.905, 153.1475, 153.3575
Brule · WISCOM
RFSS 1 · Site 104 (hex 68) · NAC B0F
Control 151.0325, 154.1525, 154.665
Voice 154.8825, 155.6625
Parkland · WISCOM
RFSS 1 · Site 105 (hex 69) · NAC B07
Control 152.1725, 152.5325
Voice 151.25, 152.0525, 152.6975, 152.8175
Dairyland · WISCOM
RFSS 1 · Site 126 (hex 7E) · NAC B06
Control 152.03, 152.5175, 152.6825
Voice 151.0475, 153.1325
Gordon · WISCOM
RFSS 1 · Site 127 (hex 7F) · NAC B0F
Control 151.0625, 152.15, 152.5925, 152.7875
Voice 153.14, 155.4525
Maple · WISCOM
RFSS 1 · Site 128 (hex 80)
Control 152.1875, 152.7425
Voice 150.95, 152.5775, 153.125, 155.46
Pattison · WISCOM
RFSS 1 · Site 145 (hex 91) · NAC B0E
Control 152.1575, 152.5475, 152.84, 154.1, 155.5125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Douglas County

Common questions

What frequency does the fire department use in Douglas County?

Fire dispatch channels listed for Douglas County: Douglas County Fire 154.3700 MHz, narrow FM, 77.0 PL.

Do fire departments and EMS use a trunked radio system in Douglas County?

Yes. Fire and EMS talkgroups are listed for WISCOM: 5 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Douglas County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Douglas County?

For Douglas County, start with the Bennett site of WISCOM. Its control channels are 139.1625, 139.3625, 151.115 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Douglas County fire and EMS frequencies encrypted?

None of the 3 conventional frequencies listed for Douglas County are marked encrypted.

Are Douglas County fire and EMS talkgroups encrypted?

None of the 5 talkgroups listed for Douglas County are marked encrypted.