Skip to content

Summit Fire and EMS Frequencies

We do not have frequencies listed specifically for Summit in Douglas County, Wisconsin yet. Countywide channels for Douglas County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Pattison (WISCOM), about 6 miles away.

About Summit Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Summit: Douglas County Fire 154.3700 MHz, narrow FM, 77.0 PL. Trunked: WISCOM, for example Douglas County Fire talkgroup 16005 (hex 3e85).

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: WISCOM: 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Summit, start with the Pattison site of WISCOM, about 6 miles away. Its control channels: 152.1575, 152.5475, 152.84 MHz.

Data updated .

Douglas County channels that also cover Summit

Fire Dispatch

Fire Dispatch frequencies for Douglas County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Douglas County FireDouglas County Fire – Dispatch154.3700
In 153.8900
77.0 PLFMNWRB471

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Douglas County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Douglas County FireDouglas County Fire – Fire Ground155.385077.0 PLFMNWRB471

Hospitals & Medical

Hospitals & Medical frequencies for Douglas County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Douglas County HospitalEMS to Superior Hospital155.3400151.4 PLFMNKNBT423

WISCOM

WISCOM talkgroups
AgencyDescriptionTalkgroupHexMode
Douglas County FireDouglas County Paging160053e85D
Douglas County FireDouglas County Fire160073e87D
Douglas County FireDouglas County Fire160083e88D
Douglas County EMSDouglas County EMS160063e86D
Douglas County EMSMayo Clinic Ambulance Service160263e9aD

Nearest trunked radio sites

Distances are measured from the center of Summit.

Pattison · WISCOM
RFSS 1 · Site 145 (hex 91) · NAC B0E · about 6 mi away
Control 152.1575, 152.5475, 152.84, 154.1, 155.5125
Bennett · WISCOM
RFSS 1 · Site 59 (hex 3B) · NAC B05 · about 14 mi away
Control 139.1625, 139.3625, 151.115
Voice 154.325, 155.295
Dairyland · WISCOM
RFSS 1 · Site 126 (hex 7E) · NAC B06 · about 15 mi away
Control 152.03, 152.5175, 152.6825
Voice 151.0475, 153.1325
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Summit?

We do not have a fire dispatch channel listed specifically for Summit. The county-level fire dispatch channels in the same county: Douglas County Fire 154.3700 MHz, narrow FM, 77.0 PL.

Do fire departments and EMS use a trunked radio system in Summit?

Yes. The county-level systems that cover Summit are Fire and EMS talkgroups are listed for WISCOM: 5 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Summit?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Summit?

For Summit, start with the Pattison site of WISCOM. Its control channels are 152.1575, 152.5475, 152.84, 154.1 MHz. Program a control channel first; the scanner finds the voice channels from it.