Skip to content

Dodge County Fire and EMS Frequencies

Dodge County in Wisconsin has 4 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 37 cities and communities below for local fire departments and EMS agencies.

About Dodge County Fire and EMS Frequencies

Quick answer: Fire dispatch for Dodge County: Dodge County Fire 154.3250 MHz, narrow FM, 79.7 PL.

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Dodge County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Dodge County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Dodge County FireFire/EMS Dispatch154.3250
In 158.8800
79.7 PLFMNKFY426
Dodge County FireFire/EMS Paging154.4450
In 159.3000
107.2 PLFMNKFY426

Hospitals & Medical

Hospitals & Medical frequencies for Dodge County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Dodge County HospitalEMS to Beaver Dam Hospital155.3400114.8 PLFMNKTH569
Dodge County HospitalEMS to Waupun Hospital155.340071.9 PLFMNWPML506

Radio system sites in Dodge County

Program the control channel first; your scanner finds the voice channels from it.

Fox Lake · WISCOM
RFSS 1 · Site 70 (hex 46) · NAC B0D
Control 139.7625, 151.265, 152.0525
Voice 151.04, 151.37
Rubicon · WISCOM
RFSS 1 · Site 86 (hex 56) · NAC B0D
Control 139.1125, 139.2625, 152.6075
Voice 151.475, 155.46
DOC Fox Lake · WISCOM
RFSS 1 · Site 203 (hex CB) · NAC B0C
Control 852.4375, 853.9375
Voice 852.9375, 853.4375
DOC Waupun · WISCOM
RFSS 1 · Site 218 (hex DA) · NAC B0C
Control 851.375, 852.375, 852.875
Voice 851.875, 853.375, 853.875, 854.9625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Dodge County

Common questions

What frequency does the fire department use in Dodge County?

Fire dispatch channels listed for Dodge County: Dodge County Fire 154.3250 MHz, narrow FM, 79.7 PL.

What scanner do I need to listen to fire and EMS in Dodge County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Dodge County?

For Dodge County, start with the Fox Lake site of WISCOM. Its control channels are 139.7625, 151.265, 152.0525 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Dodge County fire and EMS frequencies encrypted?

None of the 4 conventional frequencies listed for Dodge County are marked encrypted.