Skip to content

Shields Fire and EMS Frequencies

We do not have frequencies listed specifically for Shields in Dodge County, Wisconsin yet. Countywide channels for Dodge County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Columbus (WISCOM), about 13 miles away.

About Shields Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Shields: Dodge County Fire 154.3250 MHz, narrow FM, 79.7 PL.

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Dodge County channels that also cover Shields

Fire Dispatch

Fire Dispatch frequencies for Dodge County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Dodge County FireFire/EMS Dispatch154.3250
In 158.8800
79.7 PLFMNKFY426
Dodge County FireFire/EMS Paging154.4450
In 159.3000
107.2 PLFMNKFY426

Hospitals & Medical

Hospitals & Medical frequencies for Dodge County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Dodge County HospitalEMS to Beaver Dam Hospital155.3400114.8 PLFMNKTH569
Dodge County HospitalEMS to Waupun Hospital155.340071.9 PLFMNWPML506

Nearest trunked radio sites

Distances are measured from the center of Shields.

Columbus · WISCOM
RFSS 1 · Site 83 (hex 53) · NAC B09 · about 13 mi away
Control 139.7375, 151.34, 152.75
Voice 150.875, 155.505
Rubicon · WISCOM
RFSS 1 · Site 86 (hex 56) · NAC B0D · about 19 mi away
Control 139.1125, 139.2625, 152.6075
Voice 151.475, 155.46
Deerfield · WISCOM
RFSS 1 · Site 1 (hex 1) · NAC b05 · about 20 mi away
Control 139.9125, 152.1125, 152.5175, 152.6525
Voice 151.07, 155.355
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Shields?

We do not have a fire dispatch channel listed specifically for Shields. The county-level fire dispatch channels in the same county: Dodge County Fire 154.3250 MHz, narrow FM, 79.7 PL.

What scanner do I need to listen to fire and EMS in Shields?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Shields?

For Shields, start with the Columbus site of WISCOM. Its control channels are 139.7375, 151.34, 152.75 MHz. Program a control channel first; the scanner finds the voice channels from it.