Skip to content

Clark County Fire and EMS Frequencies

Clark County in Wisconsin has 4 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 43 cities and communities below for local fire departments and EMS agencies.

About Clark County Fire and EMS Frequencies

Quick answer: Fire dispatch for Clark County: Clark County Fire 155.9550 MHz, narrow FM, 82.5 PL. EMS dispatch for Clark County: Clark County EMS 155.8050 MHz, narrow FM, 127.3 PL.

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Clark County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Clark County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Clark County FireCounty Fire155.9550
In 153.9200
82.5 PLFMNKYU837

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Clark County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Clark County FireCountywide Fireground154.3700192.8 PLFMNWRBU252

Fire Talk-around

Fire Talk-around frequencies for Clark County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Owen-Withee Fire DeptOwen-Withee Fire Department – Alternate155.8050
In 158.9550
225.7 PLFMNKYU837

EMS Dispatch

EMS Dispatch frequencies for Clark County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Clark County EMSClark County EMS – Dispatch155.8050
In 158.9550
127.3 PLFMNKYU837

Radio system sites in Clark County

Program the control channel first; your scanner finds the voice channels from it.

Neillsville · WISCOM
RFSS 1 · Site 54 (hex 36) · NAC B07
Control 139.7375, 152.1875, 152.5025, 152.6825
Voice 151.235
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Clark County

Common questions

What frequency does the fire department use in Clark County?

Fire dispatch channels listed for Clark County: Clark County Fire 155.9550 MHz, narrow FM, 82.5 PL.

What frequency does EMS or the ambulance service use in Clark County?

EMS dispatch channels listed for Clark County: Clark County EMS 155.8050 MHz, narrow FM, 127.3 PL.

What scanner do I need to listen to fire and EMS in Clark County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Clark County?

For Clark County, start with the Neillsville site of WISCOM. Its control channels are 139.7375, 152.1875, 152.5025, 152.6825 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Clark County fire and EMS frequencies encrypted?

None of the 4 conventional frequencies listed for Clark County are marked encrypted.