Skip to content

Foster Fire and EMS Frequencies

We do not have frequencies listed specifically for Foster in Clark County, Wisconsin yet. Countywide channels for Clark County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Neillsville (WISCOM), about 10 miles away.

About Foster Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Foster: Clark County Fire 155.9550 MHz, narrow FM, 82.5 PL. County-level ems dispatch that covers Foster: Clark County EMS 155.8050 MHz, narrow FM, 127.3 PL.

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Clark County channels that also cover Foster

Fire Dispatch

Fire Dispatch frequencies for Clark County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Clark County FireCounty Fire155.9550
In 153.9200
82.5 PLFMNKYU837

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Clark County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Clark County FireCountywide Fireground154.3700192.8 PLFMNWRBU252

Fire Talk-around

Fire Talk-around frequencies for Clark County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Owen-Withee Fire DeptOwen-Withee Fire Department – Alternate155.8050
In 158.9550
225.7 PLFMNKYU837

EMS Dispatch

EMS Dispatch frequencies for Clark County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Clark County EMSClark County EMS – Dispatch155.8050
In 158.9550
127.3 PLFMNKYU837

Nearest trunked radio sites

Distances are measured from the center of Foster.

Neillsville · WISCOM
RFSS 1 · Site 54 (hex 36) · NAC B07 · about 10 mi away
Control 139.7375, 152.1875, 152.5025, 152.6825
Voice 151.235
Osseo · WISCOM
RFSS 1 · Site 56 (hex 38) · NAC b0e · about 19 mi away
Control 139.3125, 152.6225, 152.8025
Voice 151.01, 154.935
DOC Stanley · WISCOM
RFSS 1 · Site 216 (hex D8) · NAC B0C · about 19 mi away
Control 851.4375, 851.9375
Voice 852.4375, 852.9375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Foster?

We do not have a fire dispatch channel listed specifically for Foster. The county-level fire dispatch channels in the same county: Clark County Fire 155.9550 MHz, narrow FM, 82.5 PL.

What frequency does EMS or the ambulance service use in Foster?

We do not have a EMS dispatch channel listed specifically for Foster. The county-level EMS dispatch channels in the same county: Clark County EMS 155.8050 MHz, narrow FM, 127.3 PL.

What scanner do I need to listen to fire and EMS in Foster?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Foster?

For Foster, start with the Neillsville site of WISCOM. Its control channels are 139.7375, 152.1875, 152.5025, 152.6825 MHz. Program a control channel first; the scanner finds the voice channels from it.