Skip to content

Calumet County Fire and EMS Frequencies

Calumet County in Wisconsin has 3 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 16 cities and communities below for local fire departments and EMS agencies.

About Calumet County Fire and EMS Frequencies

Quick answer: Fire dispatch for Calumet County: Calumet County Fire 154.2200 MHz, narrow FM, 186.2 PL. EMS dispatch for Calumet County: Calumet County EMS 453.1750 MHz, DMR, CC 2 · TG 101 · SL 1.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (DMR), which needs a scanner that decodes that mode.

Data updated .

Calumet County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Calumet County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Calumet County FireCalumet County Fire – Dispatch154.2200
In 158.9850
186.2 PLFMNKMD400

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Calumet County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Calumet County FireCalumet County Fire – Fire Ground156.1050186.2 PLFMNKMD400

EMS Dispatch

EMS Dispatch frequencies for Calumet County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Calumet County EMSGold Cross Ambulance Service Dispatch453.1750
In 458.1750
CC 2 · TG 101 · SL 1DMRWQCA801

Radio system sites in Calumet County

Program the control channel first; your scanner finds the voice channels from it.

Chilton · WISCOM
RFSS 1 · Site 42 (hex 2A) · NAC B02
Control 139.3125, 151.3325, 152.0225, 152.1125, 152.6525
Voice 152.5175
Chilton 800 · WISCOM
RFSS 1 · Site 245 (hex F5) · NAC B04
Control 851.4875, 851.9875, 852.4875, 852.9875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Calumet County

Common questions

What frequency does the fire department use in Calumet County?

Fire dispatch channels listed for Calumet County: Calumet County Fire 154.2200 MHz, narrow FM, 186.2 PL.

What frequency does EMS or the ambulance service use in Calumet County?

EMS dispatch channels listed for Calumet County: Calumet County EMS 453.1750 MHz, DMR, CC 2 · TG 101 · SL 1.

What scanner do I need to listen to fire and EMS in Calumet County?

The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.

What are the control channels for trunked radio in Calumet County?

For Calumet County, start with the Chilton site of WISCOM. Its control channels are 139.3125, 151.3325, 152.0225, 152.1125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Calumet County fire and EMS frequencies encrypted?

None of the 3 conventional frequencies listed for Calumet County are marked encrypted.