Skip to content

Appleton Fire and EMS Frequencies

We do not have frequencies listed specifically for Appleton in Calumet County, Wisconsin yet. Countywide channels for Calumet County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Outagamie County Simulcast (Outagamie-Winnebago County), about 11 miles away.

About Appleton Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Appleton: Calumet County Fire 154.2200 MHz, narrow FM, 186.2 PL. County-level ems dispatch that covers Appleton: Calumet County EMS 453.1750 MHz, DMR, CC 2 · TG 101 · SL 1.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (DMR), which needs a scanner that decodes that mode.

Data updated .

Calumet County channels that also cover Appleton

Fire Dispatch

Fire Dispatch frequencies for Calumet County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Calumet County FireCalumet County Fire – Dispatch154.2200
In 158.9850
186.2 PLFMNKMD400

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Calumet County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Calumet County FireCalumet County Fire – Fire Ground156.1050186.2 PLFMNKMD400

EMS Dispatch

EMS Dispatch frequencies for Calumet County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Calumet County EMSGold Cross Ambulance Service Dispatch453.1750
In 458.1750
CC 2 · TG 101 · SL 1DMRWQCA801

Nearest trunked radio sites

Distances are measured from the center of Appleton.

Outagamie County Simulcast · Outagamie-Winnebago County
RFSS 1 · Site 2 (hex 2) · NAC 4E2 · about 11 mi away
Control 857.0125, 857.9625, 858.7125, 859.9625
Voice 855.9875, 856.2375, 856.7625
DHS Winnebago · WISCOM
RFSS 1 · Site 223 (hex DF) · NAC B0C · about 15 mi away
Control 851.475, 851.925, 852.425, 852.925
Voice 853.425
DOC Oshkosh · WISCOM
RFSS 1 · Site 211 (hex D3) · about 17 mi away
Control 770.16875, 770.41875, 770.69375, 773.05625, 774.05625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Appleton?

We do not have a fire dispatch channel listed specifically for Appleton. The county-level fire dispatch channels in the same county: Calumet County Fire 154.2200 MHz, narrow FM, 186.2 PL.

What frequency does EMS or the ambulance service use in Appleton?

We do not have a EMS dispatch channel listed specifically for Appleton. The county-level EMS dispatch channels in the same county: Calumet County EMS 453.1750 MHz, DMR, CC 2 · TG 101 · SL 1.

What scanner do I need to listen to fire and EMS in Appleton?

The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.

What are the control channels for trunked radio in Appleton?

For Appleton, start with the Outagamie County Simulcast site of Outagamie-Winnebago County. Its control channels are 857.0125, 857.9625, 858.7125, 859.9625 MHz. Program a control channel first; the scanner finds the voice channels from it.